Abstract:The effect of niobium (Nb) doping in one-dimensional (1D) nanostructured LiNi1/3Co1/3Mn1/3O2 (NCM) cathode has been investigated for this study. Nb-doped NCM nanofibres have been prepared through an electrospinning method followed by controllable sintering process. X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS) results confirmed that Nb-doping can effectively reduce cation mixing, thus improve the structural stability. In addition, due to the valence compensation balance, Mn4+ ions are partially reduced to Mn3+ ions, which can further improve the conductivity and stable cycling performance. Therefore, increased discharge capacities, high first cycle efficiencies and superior cycling and rate behaviors are observed between normal voltage limits for the Nb-doped NCM compositions in electrochemical cells. Specifically, Nb-doped NCM nanofibres achieve a high discharge capacity of 200.4 mAh/g at 0.1 C with a high Coulombic efficiency of 92.3%. Moreover, a high discharge capacity of 118.7 mAh/g even at 5 C with 83.3% capacity retention after 200 cycles is also achieved. Also, cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) results demonstrate that Nb-doping can mitigate the electrochemical polarization of NCM and improve the lithium ion diffusion coefficient, leading to the improvement of electrochemical performances. It is highly expected that our findings can provide a general approach to improve the electrochemical properties of cathode materials for lithiumion batteries. (c) 2018 Elsevier Ltd. All rights reserved.

Nb-Doped TiO2 with Outstanding Na/Mg-Ion Battery Performance.

Nb-Doped TiO 2 with Outstanding Na/Mg-Ion Battery Performance

V-doped T-Nb 2 O 5 toward high-performance Mg 2+ /Li + hybrid ion batteries

V-doped T-Nb2O5 Toward High-Performance Mg2+/Li+ Hybrid Ion Batteries

V-doped T-Nb<sub>2</sub>O<sub>5</sub> toward high-performance Mg<sup>2+</sup>/Li<sup>+</sup> hybrid ion batteries

Improved ions storage performance for various batteries: Anatase TiO 2 with high-concentration of Ti vacancies

Improved Ions Storage Performance for Various Batteries: Anatase TiO2 with High-Concentration of Ti Vacancies

Ti2Nb10O29–x Mesoporous Microspheres As Promising Anode Materials for High-Performance Lithium-Ion Batteries

Improvements in the Electrochemical Performance of Sodium Manganese Oxides by Ti Doping for Aqueous Mg-Ion Batteries

Titanate-derived Nb-doped TiO2 nanoparticles displaying improved lithium storage performance

Niobium doped lithium titanate as a high rate anode material for Li-ion batteries

Stable Electrochemical Properties of Titanium Doped LayeredP2-Type Na0.67Ni0.15 Mn0.85O2 Cathode Material for Sodium IonBatteriesH

Li-doped P3-type Mn-Ni-Based Cathodes with Improved Electrochemical Performance for Na-ion Batteries

Synthesis and Electrochemical Performance of Defected Nano-Micro Structure Sodium/lithium Titanate Composites Materials for Lithium-Ion Batteries

Insights into the Ti4+ Doping in P2-type Na0.67Ni0.33Mn0.52Ti0.15O2 for Enhanced Performance of Sodium-Ion Batteries

Ti4+ Substitution Suppressing P2-O2 Phase Transition to Construct Stable P2-Na0.67ni0.33mn0.67o2 Cathode for Long-Term Durable Sodium-Ion Batteries

Unraveling the Synergistic Effect of Mg and Ti Codoping to Realize an Ordered Structure and Excellent Performance for Sodium-Ion Batteries

Atomic-scale investigation on lithium storage mechanism in TiNb 2O 7

1D Nb-doped LiNi1/3Co1/3Mn1/3O2 Nanostructures As Excellent Cathodes for Li-ion Battery

Modulating Valence Electrons and Na Occupancy in Layered Cathodes for High-Performance Na-Ion Batteries

Synergistic Effect of Polymorphs in Doped NaNi0.5Mn0.5O2 Cathode Material for Improving Electrochemical Performances in Na-Batteries