Abstract:Thermoelectric‐poor brownmillerite SrCoO2.5 is converted to a [Sr2O2H2]0.5CoO2, [Sr2O2]0.4CoO2 and [Sr2CoO3]0.57CoO2 layered‐structure. A room‐temperature in‐plane power factor of 3.6 mW K−2 m−1, power output density of 4.5 W m−2 at temperature diffence of 28 K and out‐of‐plane thermal conductivity of 0.33 W K−1 m−1 are obtained in the [Sr2O2]0.4CoO2 that exhibits the highest oxygen deficiency (δ = 2.95), which is on par with Bi2Te3, the benchmark. Introducing large oxygen deficiencies while retaining low resistivity is important for enhancing the overall thermoelectric properties in 3d transition‐metal oxides. In this study, a new synthesis route to reconstruct the insulating brownmillerite SrCoO2.5 is adapted. Through a step‐by‐step nano‐blocks modification, a series of highly‐conductive layered structures is evolved, which are [Sr2O2H2]0.5CoO2, [Sr2O2]0.4CoO2, and [Sr2CoO3]0.57CoO2, while still retaining considerable Seebeck coefficient (≈100 μV K−1). Coexistence of low resistivity and high oxygen deficiency is realized in the latter two polymorphs by forming a majority of sintered oxygen vacancies in the rock‐salt layer and a minority of normal oxygen vacancies in the CoO2 layer. A room‐temperature in‐plane power factor of 3.6 mW K−2 m−1, power output density of 4.5 W m−2 at a temperature difference of 28 K, and an out‐of‐plane thermal conductivity of 0.33 W K−1 m−1 are obtained in the [Sr2O2]0.4CoO2 thin film that exhibits the highest oxygen deficiency (δ = 2.95), which is on par with Bi2Te3, the benchmark. It is pointed out that proper distribution of oxygen vacancy is essential in tailoring the physical and chemical properties of transition‐metal oxides. The sintered/normal oxygen vacancy layer model provides guidance to the exploration of materials with both low electric resistivity and thermal conductivity.

Thermoelectric Properties of Layered Oxyselenides with 3d Transition Metal Ions

Seeking New Layered Oxyselenides with Promising Thermoelectric Performance

Light Element Doping and Introducing Spin Entropy: an Effective Strategy for Enhancement of Thermoelectric Properties in BiCuSeO.

Polycrystalline Bicuseo Oxide As A Potential Thermoelectric Material

Remarkable Enhancement in Thermoelectric Performance of BiCuSeO by Cu Deficiencies.

Microwave Synthesis and Enhanced Thermoelectric Performance of p-Type Bi 0.90 Pb 0.10 Cu 1- x Fe x SeO Oxyselenides

Synergistic modulation of electrical and thermal transport toward promising n-type MgOCuSbSe2 thermoelectric performance by MO-intercalated CuSbSe2

High Thermoelectric Performance of BiCuSeO Via Minimizing the Electronegativity Difference in Bi–O Layer

Enhanced Thermoelectric Performance of Zn-doped Oxyselenides: BiCu1−x Zn X SeO

Band Structure Engineering of Bi<sub>4</sub>O<sub>4</sub>SeCl<sub>2</sub> for Thermoelectric Applications

High thermoelectric performance of oxyselenides: intrinsically low thermal conductivity of Ca-doped BiCuSeO

Converting Brownmillerite to Alternate Layers of Oxygen‐Deficient and Conductive Nano‐Sheets with Enhanced Thermoelectric Properties

Band degeneracy enhanced thermoelectric performance in layered oxyselenides by first-principles calculations

Thermoelectric properties of Bi 1− x Pb x Cu 1− x SeO oxyselenides

Thermoelectric properties of Sm-doped BiCuSeO oxyselenides fabricated by two-step reactive sintering

Synergistically Optimizing Electrical and Thermal Transport Properties of BiCuSeO Via a Dual‐Doping Approach

Thermal Transport and Mechanical Properties of Layered Oxychalcogenides LaCuOX (X = S, Se, and Te)

Thermal Stability and Oxidation Resistance of BiCuSeO Based Thermoelectric Ceramics

An Update Review on N-Type Layered Oxyselenide Thermoelectric Materials

Enhancing thermoelectric performance of n-type Bi6Cu2Se4O6 through introducing transition metal elements

Local symmetry distortion induced anomalous thermal conduction in thermoelectric layered oxyselenides