Abstract:We report on the high thermoelectric performance of p-type polycrystalline BiCuSeO, a layered oxyselenide composed of alternating conductive (Cu 2 Se 2 ) 2− and insulating (Bi 2 O 2 ) 2+ layers. The electrical transport properties of BiCuSeO materials can be significantly improved by substituting Bi 3+ with Ca 2+ . The resulting materials exhibit a large positive Seebeck coefficient of ∼+330 μV K −1 at 300 K, which may be due to the ‘natural superlattice’ layered structure and the moderate effective mass suggested by both electronic density of states and carrier concentration calculations. After doping with Ca, enhanced electrical conductivity coupled with a moderate Seebeck coefficient leads to a power factor of ∼4.74 μW cm −1 K −2 at 923 K. Moreover, BiCuSeO shows very low thermal conductivity in the temperature range of 300 (∼0.9 W m −1 K −1 ) to 923 K (∼0.45 W m −1 K −1 ). Such low thermal conductivity values are most likely a result of the weak chemical bonds (Young’s modulus, E ∼76.5 GPa) and the strong anharmonicity of the bonding arrangement (Gruneisen parameter, γ ∼1.5). In addition to increasing the power factor, Ca doping reduces the thermal conductivity of the lattice, as confirmed by both experimental results and Callaway model calculations. The combination of optimized power factor and intrinsically low thermal conductivity results in a high ZT of ∼0.9 at 923 K for Bi 0.925 Ca 0.075 CuSeO.

Thermoelectric properties of Bi 1− x Pb x Cu 1− x SeO oxyselenides

Enhanced Thermoelectric Properties in Bicuseo Oxyselenides Via Zn and S Dual-Site Substitution

Co-doping for Significantly Improved Thermoelectric Figure of Merit in P-Type Bi1-2xMgxPbxCuSeO Oxyselenides

Enhanced Thermoelectric Performance of Zn-doped Oxyselenides: BiCu1−x Zn X SeO

Thermoelectric properties of Sm-doped BiCuSeO oxyselenides fabricated by two-step reactive sintering

Complex Electronic Structure and Compositing Effect in High Performance Thermoelectric BiCuSeO.

Electrical and Thermal Transport Behavior in Zn-Doped BiCuSeO Oxyselenides

Polycrystalline Bicuseo Oxide As A Potential Thermoelectric Material

Enhanced thermoelectric performance of BiCuSO by Pb doping and Se alloying

Microwave Synthesis and Enhanced Thermoelectric Performance of p-Type Bi 0.90 Pb 0.10 Cu 1- x Fe x SeO Oxyselenides

Synergistically optimized electron and phonon transport of p-type BiCuSeO oxyselenides via Pb dopant and Te composite

Enhanced Thermoelectric Properties in Pb-doped BiCuSeO Oxyselenides Prepared by Ultrafast Synthesis

Thermoelectric properties of Pb-doped BiCuSeO ceramics

Mechanical Alloying and Spark Plasma Sintering of Bicuseo Oxyselenide: Synthesis Process and Thermoelectric Properties

Effect of Ba and Pb Dual Doping on the Thermoelectric Properties of BiCuSeO Ceramics

High thermoelectric performance of oxyselenides: intrinsically low thermal conductivity of Ca-doped BiCuSeO

Enhanced Thermoelectric Properties and Electronic Structures of P-Type BiCu1−xAgxSeO Ceramics

Synergistically Optimizing Electrical and Thermal Transport Properties of BiCuSeO Via a Dual‐Doping Approach

Thermoelectric Properties of BiCuSO Doped with Pb

Thermoelectric Properties of Bi2O2Se Single Crystals

Effects of Sulfur Substitution for Oxygen on the Thermoelectric Properties of Bi2O2Se