Abstract:Tunnel-type anchorage are increasingly used in the construction of long-span suspension bridges. Numerical methods are a major means to study their bearing characteristics and failure modes. The current mainstream research method is still based on continuum mechanics, which cannot simulate the whole failure evolution process of tunnel-type anchorage-surrounding rock system. Therefore, discontinuous deformation analysis method based on discontinuous medium mechanics was used to carry out related research, comprehensively considering the influence of different rock mass quality and faults. The results show that: 1) In the case of soft rock and hard rock, the bearing capacity of the tunnel-type anchorage increases with the increase of the clamping angle, and the change in hard rock is more obvious. 2) Under the condition of soft rock, the envelope area of resistance body increases linearly with the increase of clamping angle. Because of gravity, the envelope area of the resistance body on the lower side of the tunnel-type anchorage is larger than that on the upper side. Under the four clamping angles of 2°, 4°, 6° and 8°, the envelope curves on the upper and lower sides of the tunnel-type anchorage are parallel to each other on their own sides. 3) Compared with the soft rock, the envelope areas of hard rock under the above four clamping angles are significantly increased, and the growth multiple is between 0.44 and 0.87. But in this case, the envelope area has no obvious change with the increase of clamping angle. 4) In soft rock, the envelope shape of the resistance body is a curve that is convex toward the outside of the anchorage; when it is hard rock, it tends to be a curve that is concave toward the inside of the anchorage. 5) Under the condition of hard rock, the integral deformation of surrounding rock on both sides of the tunnel-type anchorage is more obvious, which means that the load transfer range is wider and the clamping effect is more obvious. 6) The ultimate bearing capacity increases with the increase of the clamping angle, and shows a linear change trend. 7) Faults significantly weaken the bearing capacity of tunnel-type anchorage, but the impact of faults at different angles is slightly different. Finally, the whole process of deformation and failure of surrounding rock is intuitively displayed, and the load transfer mechanism can be peeped from it.

Experimental study on the progressive failure behaviour of shallow tunnel-type anchorage in soft-rock strata using digital image correlation

Instability Mechanism of Shallow Tunnel in Soft Rock Subjected to Surcharge Loads

Physical Model Test and Application of 3D Printing Rock-Like Specimens to Laminated Rock Tunnels

Study Of Surrounding Rock Damage Induced By Tunnel Boring Machine Driving Tunnel At West Route Of South To North Water Transfer Project

Study on failure mechanism of tunnel-type anchorage using discontinuous deformation analysis method

Real-time monitoring of the development of brittle fracture in hard rock tunnels based on physical model test

Experimental Study on Deformation and Failure Characteristics and Monitoring and Early Warning of Surrounding Rock of Tunnel Crossing Sliding Surface

Physical Model Study on Brittle Failure of Pressurized Deep Tunnel with Support System

Experimental investigation on mechanical properties and deformation mechanism of soft-hard interbedded rock-like material based on digital image correlation

Model test study on the dynamic failure process of tunnel surrounding rocks in jointed rock mass under explosive load

Experimental Investigation of the Deformation and Failure Behavior of a Tunnel Excavated in Mixed Strata Using Transparent Soft Rock

Large-scale field model testing of the effects of soft rock water content on the bearing performance of tunnel-type anchorages

Laboratory Observation of Spalling Process Induced by Tangential Stress Concentration in Hard Rock Tunnel

Experimental investigation on stress-induced failure in D-shaped hard rock tunnel under water-bearing and true triaxial compression conditions

Study on progressive failure mode of surrounding rock of shallow buried bias tunnel considering strain-softening characteristics

Effect of horizontal stress on the mesoscopic deformation and failure mechanism of layered surrounding rock masses in tunnels

Failure process and characteristics of deep concrete-supported arch tunnel under true-triaxial stress

Tunnel failure mechanism during loading and unloading processes through physical model testing and DEM simulation

Long-term deformation and control structure of rheological tunnels based on numerical simulation and on-site monitoring

Stress Distribution and Stress-induced Failures in Surrounding Rock Mass of Deep Tunnels

Advanced stability analysis method for the tunnel face in jointed rock mass based on DFN-DEM