Abstract:Tunnel-type (T-type) Na0.44MnO2 (NMO) is a promising cathode material for sodium-ion batteries (SIBs) owing to its high rate performance and cycling stability compared to manganese-based layered oxides. However, the low specific capacity still restricts its practical applications. Herein, a Co-doped T-type NMO is synthesized through a facile solid-state reaction method and utilized as a cathode material for SIBs. A T-type Na0.44Mn0.9925Co0.0075O2 (NMO-3) electrode can deliver a high reversible capacity of 138 mAh g–1 at 0.1C, a superior rate capability (133, 130, 121, 106, and 93 mAh g–1 at 0.5, 1, 2, 5, and 10C, respectively), and excellent cycling stability (85.2% at 10C after 500 cycles). The substitution of Co3+ by Mn3+ leads to the enlargement of small and S-shaped tunnel spaces, which facilitates the insertion/deinsertion of Na+ into/from NMO-3 and greatly enhances its rate capability and cycling stability. Moreover, the reduced energy barriers for Na+ diffusion in small tunnels make the inactive Na+ easier to be deintercalated, which should be responsible for its high specific capacity that exceeds the theoretical capacity of T-type NMO.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c13278?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c13278</a>.XRD patterns and Rietveld refinement plot (Figure S1); XPS patterns of Mn 2p and Co 2p (Figure S2); SEM, TEM, and HRTEM images (Figure S3); CV curves (Figure S4); charge–discharge profile of the initial three cycles (Figure S5); CV curves at different scanning rates (Figure S6); SEM images after 100, 300, and 500 cycles (Figure S7); Nyquist plots before and after cycling (Figure S8); evolution of lattice parameters obtained by in situ XRD (Figure S9); assembly drawing of the in situ XRD cell (Figure S10); formation energies with different Co-substitution contents (Figure S11); structure evolutions and energy barriers (Figure S12); TEM-HAADF and TEM-EDX element mapping images at a fully charged state (Figure 13); electronic conductivities (Figure S14); lattice parameters from Rietveld refinement (Table S1); ICP-OES (Table S2); content of Mn3+ and Mn4+ (Table S3); dissolution degree of Mn after cycling (Table S4); impedance parameters before cycling (Table S5); impedance parameters after cycling (Table S6); comparison of electrochemical properties (Table S7); and potential of redox peaks by CV curves (Table S8) (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c13278/suppl_file/am0c13278_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

An Advanced Medium-Entropy Substituted Tunnel-Type Na0.44MnO2cathode for High-Performance Sodium-Ion Batteries

Insights into unrevealing the effects of the monovalent cation substituted tunnel-type cathode for high-performance sodium-ion batteries

Structural Insight into the Abnormal Capacity of a Co-Substituted Tunnel-Type Na0.44MnO2 Cathode for Sodium-Ion Batteries

High Performance Sodium-Ion Full Battery Based on One-Dimensional Nanostructures: the Case of Na0.44MnO2 Cathode and MoS2 Anode

Structural Insight into the Abnormal Capacity of a Co-Substituted Tunnel-Type Na 0.44 MnO 2 Cathode for Sodium-Ion Batteries

A Well-Designed P2-Na0.67Mn0.85Al0.05Zn0.1O< Sub>2 Cathode for Superior Sodium-Ion Batteries

Engineering sodium-rich manganese oxide with robust tunnel structure for high-performance sodium-ion battery cathode application

High-performance heterostructure Na0.7MnO2.05–Na0.91MnO2 as a lithium-free cathode for lithium-ion batteries

High Stability Na0.7MnO2.05 Cathode for Sodium Ion Batteries

Fe‐Based Tunnel‐Type Na0.61[Mn0.27Fe0.34Ti0.39]O2 Designed by a New Strategy As a Cathode Material for Sodium‐Ion Batteries

Ultrafast and Highly Efficient Sodium Ion Storage in Manganese‐Based Tunnel‐Structured Cathode

Entropy Tuning Stabilizing P2‐Type Layered Cathodes for Sodium‐Ion Batteries

Boosting Reversibility of Mn‐Based Tunnel‐Structured Cathode Materials for Sodium‐Ion Batteries by Magnesium Substitution

Durable High-Rate Capability Na0.44MnO2 Cathode Material for Sodium-Ion Batteries

Sodium Stoichiometry Tuning of the Biphasic-Nax MnO2 Cathode for High-Performance Sodium-Ion Batteries.

Solid-State Synthesis of Low-Cost and High-Energy-Density Sodium Layered-Tunnel Oxide Cathodes: Dynamic Structural Evolution, Na+/Vacancy Disordering, and Prominent Moisture Stability

Prilling and Coating Strategy to Synthesize High-Performance Spherical NaNi0.4Fe0.2Mn0.4O2 Cathode Materials for Sodium Ion Batteries

Mo6+ Bifunctional Substitution of P2-type Manganese Oxide for High Performance Sodium-Ion Batteries

Design of High-Performance Cathode Materials with Single-Phase Pathway for Sodium Ion Batteries: A Study on P2-Nax(LiyMn1-y)O2 Compounds

Manipulating Stable Layered P2‐Type Cathode via a Co‐Substitution Strategy for High Performance Sodium Ion Batteries

A High-Performance Primary Nanosheet Heterojunction Cathode Composed of Na0.44 MnO2 Tunnels and Layered Na2 Mn3 O7 for Na-Ion Batteries.