Abstract:In this study, commercial cellulose membranes were surface coated with alpha‑zirconium phosphate nanoparticles (α-ZrP-n) to study their impact on the overall removal efficiency of heavy metals from synthetic metal mixture wastewater solution. A total of four homogeneous solutions (0.25, 0.50, 0.75, and 1.00 wt%) of α-ZrP-n were prepared by sonicating the nanoparticles in deionized water. These solutions were used to surface coat the commercial cellulose membranes. The Scanning Electron Microscopy (SEM) along with Energy Dispersive Spectroscopy (EDS) were used to confirm the attachment of α-ZrP-n on the cellulose membrane surface. Furthermore, the structural characteristics of the α-ZrP-n modified cellulose membranes were also studied. The water contact angle results showed that all coated membranes remained super-hydrophilic. The porosity of the membranes decreased to 48% with the addition of 1.00 wt% α-ZrP-n compared to 65% for the pristine membrane. The mechanical strength has improved from 3.4 MPa for the pristine membrane to about 4 MPa for the 1.00 wt% α-ZrP-n membrane. Similarly, the thermal stability was found to be slightly enhanced as evidenced by the increase in decomposition temperature to 280 and 285 °C in the 0.75 and 1.00 wt% α-ZrP-n membranes, respectively. Furthermore, a removal efficiency of 97.0 ± 0.6, 98.0 ± 0.5, 99.5 ± 0.2, and 91.5 ± 2.0% for Cu (II), Zn (II), Ni (II), and Pb (II), respectively, was observed with the 0.50 wt% α-ZrP-n membrane. This removal was achieved at a flux of 41.85 ± 0.87 × 103 LMH. Increasing the α-ZrP-n concentration further did not show any improvement in the overall removal efficiency. However, it led to 46% flux reduction in the 1.00 wt% α-ZrP-n membrane. The mechanism of removal of the heavy metal ions was postulated to be a combination of ion exchange and electrostatic attraction of the strong negatively charged α-ZrP-n membranes and the free metal ions in the wastewater solution.

-Zirconium phosphate nanosheets composite on cotton fiber for the removal of heavy metals

Preparation of Cotton-Based Fibrous Adsorbents for the Removal of Heavy Metal Ions.

An investigation on the amorphous zirconium phosphate compositing with cotton for the removal of heavy metal ions

Effective Removal of Heavy Metals by Nanosized Hydrous Zirconia Composite Hydrogel and Adsorption Behavior Study

Adsorption performance and mechanism of pectin modified with β-cyclodextrin for Zn2+ and Cu2

Metastable Nano-Zirconium Phosphate Inside Gel-Type Ion Exchanger for Enhanced Removal of Heavy Metals.

One-dimensional zirconium-doped titanate nanostructures for rapid and capacitive removal of multiple heavy metal ions from water.

Substantial and efficient adsorption of heavy metal ions based on protein and polyvinyl alcohol nanofibers by electrospinning

2D Water-Stable Zinc-Benzimidazole Framework Nanosheets for Ultrafast and Selective Removal of Heavy Metals

Functionalized cotton via surface-initiated atom transfer radical polymerization for enhanced sorption of Cu(II) and Pb(II)

Porous sodium alginate/cellulose nanofiber composite hydrogel microspheres for heavy metal removal in wastewater

TiO2/rectorite-trapped Cellulose Composite Nanofibrous Mats for Multiple Heavy Metal Adsorption

Synthesis of super hydrophilic cellulose-alpha zirconium phosphate ion exchange membrane via surface coating for the removal of heavy metals from wastewater

The ability of zinc oxide nanostructures for removal of Pb2+, Cu2+, Ag2+ and Cd2+ ions from wastewater: computational perspective

Adsorption of Heavy-Metal Ions from Aqueous Solution Onto Chitosan-Modified Polyethylene Terephthalate (PET)

Synthesis and Characterization of Zinc Oxide Nanoparticle Anchored Carbon as Hybrid Adsorbent Materials for Effective Heavy Metals Uptake from Wastewater

Preparation of novel ZnO-NP@Zn-MOF-74 composites for simultaneous removal of copper and tetracycline from aqueous solution

An Amidoxime-Functionalized Polypropylene Fiber: Competitive Removal of Cu(II), Pb(II) and Zn(II) from Wastewater and Subsequent Sequestration in Cement Mortar

Adsorption of Natural Composite Sandwich-Like Nanofibrous Mats for Heavy Metals in Aquatic Environment

Amine-functionalized cellulose nanofiber-sodium alginate-Fe(III) porous hollow beads for the efficient removal of Cr(VI)

Preparation of Zirconium Phosphate/Carboxymethyl Cellulose Composite Hydrogel for Cu2+ Removal