Abstract:Using single metal salts of zirconium, lanthanum, and iron as raw materials and sodium alginate as a cross-linking agent, a new composite adsorbent was prepared via the co-precipitation method and embedding immobilization technology, and its phosphorus adsorption performance in wastewater was evaluated. Scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS) were used for characterization, and a 0.5 mol·L−1 sodium hydroxide solution was used to regenerate the adsorbent. The experimental results demonstrated that the adsorption rate reached 99.88% when the wastewater volume was 50 mL, the initial concentration of phosphorus-containing wastewater was 5 mg·L−1, the pH was 5, the dosage of composite adsorbent was 0.2 g, and the adsorption time was 200 min. The prepared adsorbent could reduce the initial phosphorus concentration of 5 mg·L−1 to 0.006 mg·L−1 in simulated wastewater, and from 4.17 mg·L−1 in urban sewage to undetected (<0.01 mg·L−1), thus meeting the discharge requirements of the grade A standard of the Urban Sewage Treatment Plant Pollutant Discharge Standard (GB18918-2002). The adsorption process conformed to the Freundlich adsorption isothermal equation and quasi-second-order kinetic equation, and the adsorption reaction was exothermic and spontaneous. More importantly, after three lye regeneration tests, the removal rate of phosphorus in water remained above 68%, that is, the composite adsorbent could be reproducibly fabricated and recycled. The characterization results showed that the surface of the composite adsorbent was rough, with a complex pore structure. After phosphorus removal, the surface morphology of the composite adsorbent showed a similar honeycomb structure, with a P-H, P-O stretching vibration peak and a characteristic P2p peak. At the same time, the proportion of hydroxyl groups (M-OH) on the metal surface decreased after adsorption. Our findings thus demonstrate that the mechanism of phosphorus removal is mainly based on the coordination exchange reaction between phosphate and metal active sites and surface hydroxyl groups, resulting in the formation of granular phosphate deposits.

An investigation on the amorphous zirconium phosphate compositing with cotton for the removal of heavy metal ions

Preparation of Cotton-Based Fibrous Adsorbents for the Removal of Heavy Metal Ions.

Preparation of PVA/tetra-ZnO Composite with Framework-Supported Pore-Channel Structure and the Removal Research of Lead Ions

Effective Removal of Heavy Metals by Nanosized Hydrous Zirconia Composite Hydrogel and Adsorption Behavior Study

Selective heavy metals removal from waters by amorphous zirconium phosphate: behavior and mechanism.

Preparation and Phosphorus Removal Performance of Zr–La–Fe Ternary Composite Adsorbent Embedded with Sodium Alginate

MOF-based Ca-alginate/PAA granulate beads for efficient heavy metal removal from water: Synthesis, performance, and mechanism

Preparation of Zirconium Phosphate/Carboxymethyl Cellulose Composite Hydrogel for Cu2+ Removal

Removal of heavy metal ions from wastewater by a novel HEA/AMPS copolymer hydrogel: preparation, characterization, and mechanism

Fabrication of Amino-Functionalized CoFe2O4-SiO2 Magnetic Composites and Their Adsorption Performance for Removal of Heavy Metal Ions from Water

Porous sodium alginate/cellulose nanofiber composite hydrogel microspheres for heavy metal removal in wastewater

Efficient adsorption and separation of Mn–Cu–Cd composite pollutants using MOF-based calcium alginate composite hydrogels

Efficient heavy metal removal from water by alginate-based porous nanocomposite hydrogels: The enhanced removal mechanism and influencing factor insight

Removal of Co(II) from Aqueous Solutions with Amino Acid-Modified Hydrophilic Metal-Organic Frameworks

Understanding competitive Cu 2+ and Zn 2+ adsorption onto functionalized cellulose fiber via experimental and theoretical approach

A Graphene-Based Porous Composite Hydrogel for Efficient Heavy Metal Ions Removal from Wastewater

Preparation of Zwitterionic Hybrid Polymer and Its Application for the Removal of Heavy Metal Ions from Water.

Fibrous Chitosan/cellulose Composite As an Efficient Adsorbent for Co(Ⅱ) Removal

Synthesis of super hydrophilic cellulose-alpha zirconium phosphate ion exchange membrane via surface coating for the removal of heavy metals from wastewater

Adsorption performance and mechanism of pectin modified with β-cyclodextrin for Zn2+ and Cu2

Adsorption behavior of heavy metal ions on a polymer-immobilized amphoteric biosorbent: Surface interaction assessment