Abstract:AbstractDifficult-to-machine materials such as Ni-based superalloy suffer from severe tool wear and poor surface quality; therefore, the cooling mechanism is the key to improving machining performance and reducing the environmental pollution in manufacturing. In the past, plenty of studies verified that the micro-texture on the cutting insert improved the cutting performance under the same cooling condition. The main explanation is that the second generated cracks caused the capillary siphon phenomenon and increased the wettability of the subsurface of the workpiece. In order to investigate the effect of surface wettability differences on the cutting performance of the tool under different micro-textured morphologies, three types of micro-textured CBN tools with pit, linear, and sinusoidal morphologies were fabricated by laser machining technology. Through cutting experiments on Inconel 718 Ni-based superalloy, the cutting force, tool wear, and machined surface roughness of different micro-textured tools were compared and analyzed. The relationship between cutting performance and wettability of different shaped micro-texture was obtained by measuring the contact angle using PT-705B optical angular contact meter. The experimental results show that the presence of surface micro-textures enhances the surface wettability of the tool. It effectively reduces the cutting force and slows down the rake face’s wear and the machined part’s surface roughness. Compared with other morphologies, sinusoidal micro-textured tools show the best cutting performance. Among the four morphologies of micro-textured tools, cutting performance improvement increases with surface wettability. More generally, these primary findings are consistent with research showing that wettability is critical in micro-texture generation for high-performance machining. The conclusion is very much the key component in future attempts to overcome the assumption of the capillary siphon phenomenon on the subsurface of the workpiece.

Study on the Cooling and Lubrication Mechanism of Magnetic Field-Assisted Fe3O4@CNTs Nanofluid in Micro-Textured Tool Cutting

Study on the cooling and lubrication mechanism of magnetic field-assisted Fe 3 O 4 @CNTs nanofluid in micro-textured tool cutting

Effect of Magnetic Field on Cutting Performance of Micro-Textured Tools under Fe3O4 Nanofluid Lubrication Condition

Improving the frictional properties of the tool/chip interface of micro-textured ceramics tools by using electromagnetic-assisted nanofluids

A study on lubrication and cooling performance and machining characteristics of magnetic field–assisted minimum quantity lubrication using Fe3O4 nanofluid as cutting fluid

Enhancing tribological performance of cemented carbide (WC-12Co) by pulsed magnetic field treatment and magnetofluid

Pulsed Magnetic Field Treatment of WC-TiC-Co Cutting Inserts for Improved Microstructure and Cutting Performance

Improved Tribological Performance of TiAlSiN Coated Cemented Carbide Specimens Via a Pulsed Magnetic Field Treatment

Effect of micro-textured morphology with different wettabilities on tool cutting performance

Cutting force model of milling titanium alloy with C60 nanofluid minimum quantity lubrication

Electromagnetic Coupling Field Strengthening of WC-TiC-Co Cermet Tools

Mechanical property and cutting performance of (W,Ti)C based ceramic composites with the addition of nano-sized CaF2

Tribology and machinability performance of hybrid Al2O3 -MWCNTs nanofluids-assisted MQL for milling Ti-6Al-4 V

Preparation and Cutting Performance of Nanoscaled Al2O3-coated Micro-Textured Cutting Tool Prepared by Atomic Layer Deposition

Machining behavior using micro-grooved cutting tools filled with carbon nanotubes

Effect of Hbn/mos2 Hybrid Nanofluid Minimum Quantity Lubrication on the Cutting Performance of Self-Lubricating Ceramic Tools when Machining AISI 4340

Comparative Study on the Lubrication of Ti3C2TX MXene and Graphene Oxide Nanofluids for Titanium Alloys

Effect of hBN/MoS 2 hybrid nanofluid minimum quantity lubrication on the cutting performance of self-lubricating ceramic tools when machining AISI 4340

Cold Plasma and Different Nano-Lubricants Multi-Energy Field Coupling-Assisted Micro-Milling of Al-Li Alloy 2195-T8 and Flow Rate Optimization

Cutting Performance and Wear Mechanism of Submicron and Ultrafine Ti(C, N)-based Cermets

Thermophysical Properties of Fe3O4@CNT Nanofluid and Controllable Heat Transfer Performance under Magnetic Field