Abstract:A series of poly (arylene ether sulfone)s with high molecular weight was prepared from 4-fluorophenyl sulfone, 4, 4'-biphenol and bis (4-hydroxyphenyl) sulfone with different mole ratio. Due to the large difference between the electronic effects of biphenyl fragment and phenyl sulfone fragment on the polymer, the sulfonation reaction is easily carried out on biphenyl fragments with higher electron cloud density. The sulfonic acid groups were introduced to ortho-position of the oxy ether group on the biphenyl and sulfonation degree were successfully predicted after post-sulfonation process. Sulfonated polylarylene ether sulfone (SPAES) based proton exchange membranes (PEM) were prepared by solution casting method , of which relative viscosity , ion exchange capacity (IEC) , water uptake and swell ratio , proton conductivity , oxidative stability , mechanical properties and cell performance were investigated. Relative viscosity of sulfonated copolymers was higher than 1. 2 dL/g. The sulfonated copolymers showed that titration and 'H nuclear magnetic resonance calculated value of IEC were accordingly to that of theoretical. Water uptake and swell ratio obviously increased with increasing of IEC and temperature, and the size change ratio of the thickness direction was larger than that of plane direction in the membranes. The thermal gravimetric analyse (TGA) results indicated that the PEMs have the decompose temperature at about 280 degrees C . All the PEMs showed maximum tensile strength above 50 MPa, and the elongation at break over 15% at 20 degrees C and 20% RH. Free radical oxidative stability test showed the PEMs with low IEC become brittle in Fenton' s reagent over 200 h at 20 degrees C. The proton conductivity of PEMs were increased rapidly with the increase of the IEC and temperature, for example, the conductivity of M2-SPAES(1.34 mmol/g) and M4-SPAES(1.60 mmol/g) were 68 and 89 mS/ cm at 60 degrees C in water, and 99 and 129 mS/cm at 80 degrees C in water, respectively. H-2/O-2 Fuel cell performance showed that the open circuit voltage and maximum power output were higher than 1.0 V and 0.54 W/cm(2) under 60 degrees C , 80% RH and 0.1 MPa back pressure, respectively.

Highly Branched Poly(arylene Ether Ketone Sulfone)s Bearing Flexible Sulfoalkyl Side Chains for Proton Exchange Membranes

Sulfonated Polyaryletherketone with Pendant Benzimidazole Groups for Proton Exchange Membranes

Synthesis and Properties of Highly Branched Sulfonated Poly(arylene Ether)s As Proton Exchange Membranes

PEMs with High Proton Conductivity and Excellent Methanol Resistance Based on Sulfonated Poly (aryl Ether Ketone Sulfone) Containing Comb-Shaped Structures for DMFCs Applications

Sulfonated Branched Poly(arylene Ether Ketone Sulfone) Proton Exchange Membranes: Effects of Degree of Branching and Ion Exchange Capacity

Novel Branched Sulfonated Poly(arylene Ether)s Based on Carbazole Derivative for Proton Exchange Membrane

Synthesis and Characterization of Highly Branched Sulfonated Poly(aryl Ether Ketone) Copolymers As Proton Exchange Membranes

Preparation and properties of branched sulfonated poly(arylene ether ketone)/polytetrafluoroethylene composite materials for proton exchange membranes

Achieving Better Balance on the Mechanical Stability and Conduction Performance of Sulfonated Poly(ether Ether Ketone) Proton Exchange Membranes Through Polydopamine/polyethyleneimine Co-Modified Poly(vinylidene Fluoride) Nanofiber As Support

Side Chain Engineering of Sulfonated Poly(arylene Ether)s for Proton Exchange Membranes

High-performance ether-free branched poly(isatin terphenyl fluorene) with sulfonated pendant side chains for proton exchange membrane fuel cells

Poly(Arylene Ether)s with Sulfonic Acid Groups on the Backbone and Pendant for Proton Exchange Membranes Used in PEMFC Applications

Precise Controllable Post-sulfonation for Preparation of Sulfonated Poly (arylene ether sulfone)s and Their Properties for Proton Exchange Membrane

High conductive and dimensional stability proton exchange membranes with an all-carbon main chain and densely sulfonated structure

Synthesis of branched sulfonated poly(aryl ether ketone) copolymers and their proton exchange membrane properties

Preparation of Graft Poly(Arylene Ether Sulfone)s-Based Copolymer with Enhanced Phase-Separated Morphology As Proton Exchange Membranes Via Atom Transfer Radical Polymerization

Highly Proton Conducting Proton-Exchange Membranes Based On Fluorinated Poly(Arylene Ether Ketone)S With Octasulfonated Segments

Branched Sulfonimide-Based Proton Exchange Polymer Membranes from Poly(Phenylenebenzopheneone)s for Fuel Cell Applications

Preparation and properties of bisphenol A-based sulfonated poly(arylene ether sulfone) proton exchange membranes for direct methanol fuel cell

Partially Fluorinated Poly(arylene Ether)s Bearing Long Alkyl Sulfonate Side Chains for Stable and Highly Conductive Proton Exchange Membranes

Highly proton-conductive and low swelling polymeric membranes achieved by hydrophilic covalent cross-linking