Abstract:A series of phenylsulfonic acid–containing poly(arylene ether ketone) (psa-PAEK) were synthesized via polycondensation from 2-(4-methoxy)phenylhydroquinone and other commercial monomers, followed by postsulfonation approach under mild reaction conditions. Controlled substituted sites and the degree of sulfonation were realized using quantities of 2-(4-methoxy)phenylhydroquinone. Giving the psa-PAEK can be soluble in common organic solvents such as Dimethylsulfoxide, purity ≥99.5% (DMSO, Sinopharm Chemical Reagent Co., Ltd, Shanghai, China), NMP, 1-Methyl-2-pyrrolidinone purity ≥99.0% (NMP, Sinopharm Chemical Reagent Co., Lted, Shanghai, China), and N,N-dimethylacetamide, purity ≥99.0% (DMAc, Sinopharm Chemical Reagent Co., Lted, Shanghai, China). The tough and transparent polymer membrane was prepared by the solution casting method, which exhibited excellent mechanical properties and high proton conductivities. The tensile stress at maximum load and elongation at break of these membranes are 28.3–34.1 MPa and 101–126% in dry state, respectively. The proton conductivities of these membranes were higher than 10 −2 S cm −1 at room temperature in water. Especially, the psa-PAEK-90 with ion exchange capacity of 1.62 mequiv. g −1 exhibited the proton conductivity of 176 mS cm −1 at 80°C in water. The clear microphase separation morphology was observed by small-angle X-ray scattering, which is a powerful evidence to explain their high conductive behaviors. These results suggest that the psa-PAEK membranes have great potential as a candidate membrane for proton exchange membrane fuel cell applications.

Preparation of Graft Poly(Arylene Ether Sulfone)s-Based Copolymer with Enhanced Phase-Separated Morphology As Proton Exchange Membranes Via Atom Transfer Radical Polymerization

Sulfonated Polyaryletherketone with Pendant Benzimidazole Groups for Proton Exchange Membranes

PEMs with High Proton Conductivity and Excellent Methanol Resistance Based on Sulfonated Poly (aryl Ether Ketone Sulfone) Containing Comb-Shaped Structures for DMFCs Applications

Facile Preparation of Novel Cardo Poly(oxindolebiphenylylene) with Pendent Quaternary Ammonium by Superacid-Catalysed Polyhydroxyalkylation Reaction for Anion Exchange Membranes

Proton Exchange Membranes Prepared Via Atom Transfer Radical Polymerization for Proton Exchange Membrane Fuel Cell: Recent Advances and Perspectives

Sulfonated poly(arylene ether sulfone)s membranes with distinct microphase-separated morphology for PEMFCs

Grafting free radical scavengers onto polyarylethersulfone backbones for superior chemical stability of high temperature polymer membrane electrolytes

High conductive and dimensional stability proton exchange membranes with an all-carbon main chain and densely sulfonated structure

Characterization of Polyethylene-Graft-Sulfonated Polyarylsulfone Proton Exchange Membranes for Direct Methanol Fuel Cell Applications

Comb-shaped sulfonated poly(aryl ether sulfone) proton exchange membrane for fuel cell applications

Facile Fabrication and Characterization of Improved Proton Conducting Sulfonated Poly(Arylene Biphenylether Sulfone) Blocks Containing Fluorinated Hydrophobic Units for Proton Exchange Membrane Fuel Cell Applications

Tailoring the molecular structure of pyridine-based polymers for enhancing performance of anion exchange electrolyte membranes

A novel anion exchange membrane of three aromatic units copolymer for fuel cells

Preparation of proton exchange membrane with intrinsic micropores constructing efficient ion transport channels based on segmented copolymer (sulfonated polyimide)

Synthesis of poly(arylene ether ketone) containing phenylsulfonic acid pendant for proton exchange membrane

Influence of structure construction on water uptake, swelling, and oxidation stability of proton exchange membranes

Synthesis and characterization of poly(arylene ether ketone)s bearing pendant sulfonic acid groups for proton exchange membrane materials

Dumbbell‐Shaped, Block‐Graft Copolymer with Aligned Domains for High‐performance Hydrocarbon Polymer Electrolyte Membranes

Structural Characterization and Physicochemical Properties of Functionally Porous Proton-Exchange Membrane Based on PVDF-SPA Graft Copolymers

A New Class of Highly-Conducting Polymer Electrolyte Membranes: Aromatic ABA Triblock Copolymers

Branched Poly(Aryl Piperidinium) Membranes for Anion-Exchange Membrane Fuel Cells