Abstract:The hydrological model is the primary tool for regional water resources management, allocation, and prediction. However, these models always suffer from large uncertainties from multiple sources. Therefore, it is necessary to conduct an uncertainty analysis before performing hydrological simulation. Sequential Uncertainty Fitting (SUFI-2), Parameter Solution (ParaSol), Generalized Likelihood Uncertainty Estimation (GLUE), and Particle Swarm Optimization (PSO) integrated with the SWAT-CUP software were used to calibrate the Soil and Water Assessment Tool (SWAT) model and quantify the parameter sensitivity and prediction uncertainty of the SWAT in the Lancang River (LR) Basin, which is located in the southwest of China. This model was calibrated and validated using the four algorithms both at the daily scale, and the optimal simulation results derived by the four methods showed that the SWAT model performed well over the Yunjinghong station with Nash–Sutcliffe efficiency coefficient (NSE) and coefficient of determination (R2) values greater than 0.8 both in the calibration (1975 to 1989) and validation (1990 to 2004) periods. Among the four algorithms, the ParaSol algorithm produced the best simulation result at the daily scale with NSE values of 0.89 and 0.90 for the calibration and validation periods, respectively. Furthermore, the ParaSol algorithm has the greatest proportion of simulations (94%) with an NSE greater than 0.5. Parameter sensitivity analysis results demonstrated that the four methods all can be used for parameter sensitivity analysis in streamflow simulation, and they all identified that the base flow factor for bank storage (ALPHA_BNK) and effective hydraulic conductivity in the main channel alluvium (CH_K2) were more sensitive. The uncertainty analysis of model parameters showed that the parameter 95PPU (95% prediction uncertainty) width yielded by the ParaSol algorithm was the smallest compared with that of the other methods, followed by PSO, SUFI-2, and GLUE. The uncertainty analysis of the model simulation indicated that the SUFI-2 and PSO methods can achieve satisfactory results (with P-factor > 0.7 and R-factor < 1.5) at the daily scale; among them, SUFI-2 (P-factor = 0.93, R-factor = 1.17) performed much better than PSO (P-factor = 0.78, R-factor = 1.14). In general, by comparing its evaluation criteria (NSE, R2, RE, P-factor, and R-factor) to other methods, ParaSol stood out as the most efficient tool for model calibration. However, SUFI-2 remains the most robust method to perform uncertainty analysis considering its uncertainties of model structure, model inputs, and parameters. This study provides insight into hydrological simulation of the LR Basin using the appropriate algorithm to calibrate the model and implement the uncertainty analysis.

Baseflow estimation based on a self-adaptive non-linear reservoir algorithm in a rainy watershed of eastern China

Baseflow Separation Based on A Meteorology-Corrected Nonlinear Reservoir Algorithm in A Typical Rainy Agricultural Watershed

Estimation of Baseflow Nitrate Loads by a Recursive Tracing Source Algorithm in a Rainy Agricultural Watershed

Assessing Different Roles of Baseflow and Surface Runoff for Long-Term Streamflow Forecasting in Southeastern China

Simulation of Monthly Runoff Considering Flow Components in Yarlung Zangbo River

Impact Of Two Calibration Strategies On Flow Simulation In Qiantang River Basin, China

Role of Satellite and Reanalysis Precipitation Products in Streamflow and Sediment Modeling over a Typical Alpine and Gorge Region in Southwest China.

Improving Flood Streamflow Estimation of Ungauged Small Reservoir Basins Using Remote Sensing and Hydrological Modeling

Nierji Reservoir Flood Forecasting Based on a Data-Based Mechanistic Methodology

Uncertainty Analysis of SWAT Modeling in the Lancang River Basin Using Four Different Algorithms

How uncertainty in calibration data affects the modeling of non-point source pollutant loads in baseflow

Baseflow separation in a small watershed in New Brunswick, Canada, using a recursive digital filter calibrated with the conductivity mass balance method

Suitability analysis of automatic baseflow separation methods in typical watersheds of water-wind erosion crisscross region on the Loess Plateau,China

Runoff modeling in ungauged catchments using machine learning algorithm-based model parameters regionalization methodology

Streamflow Simulation by SWAT Using Different Precipitation Sources in Large Arid Basins with Scarce Raingauges

Runoff Simulation by SWAT Model Using High-Resolution Gridded Precipitation in the Upper Heihe River Basin, Northeastern Tibetan Plateau

Combining the Swat Model with Sequential Uncertainty Fitting Algorithm for Streamflow Prediction and Uncertainty Analysis for the Lake Dianchi Basin, China

Digital Filter Baseflow Separation Method Based on a Master Recession Curve

Comparing Statistical And Semi-Distributed Rainfall-Runoff Models For A Large Subtropical Watershed: A Case Study Of Jiulong River Catchment, China

Baseflow dynamics and multivariate analysis using bivariate and multiple wavelet coherence in an alpine endorheic river basin (Northwest China)

An automatic parameter calibration method for the SWAT model in runoff simulation