Abstract:To challenge the continuous operation performance of high energy density lithium-ion batteries at different ambient temperatures. A battery thermal management system combining Multi-stage tesla valve liquid cooling and Phase change material (MP) is proposed. After verification of the accuracy of the thermal model based on experimental measurements, numerical studies are performed at the end of 2C rate discharge. In addition, based on general full factorial design method, Kriging approximation model is used to construct complex nonlinear hybrid model between the spacing between batteries, the number of MSTV channels, coolant velocity and the performance of MP (pressure drop, standard deviation of surface temperature, and maximum temperature). At the same time, to avoid falling into local solutions, the adaptive simulated annealing (ASA) global search algorithm is integrated to optimize high-dimensionality multi-objective structural settings. The simulation results show that the designed MP-BTMS is connected with water/ethanol coolant and the inlet velocity is 0.193 m/s, the maximum temperature, standard deviation of surface temperature and pressure drop of the battery pack at 33.12 °C, 1.50 °C and 647.8 Pa, respectively. Finally, the optimised MP is used in continuous depth discharge conditions, as well as a range of simulation tests. The superiority of the optimum battery thermal management system in different application scenarios (liquid cooling/heating) is also verified. The cooling performance indicates that the use of MP reduces the total energy consumption required for coolant circulation by 79.9% compared to conventional BTMS. Moreover, it is found that at ambient temperature ( Tamb =-10 °C), the use of MP can keep the battery module warm twice as long compared to conventional BTMS. This means that MP can significantly delay the temperature drop during cold stops of EVs, thus reducing the energy required for active battery heating after short-term parking.

Research on thermal management system of lithium-ion battery with a new type of spider web liquid cooling channel and phase change materials

Thermal Management of a Li-Ion Battery for Electric Vehicles Using PCM and Water-Cooling Board

Performance of a Combined Battery Thermal Management System with Dual-Layer Phase Change Materials and Air Cooling Technologies

Optimization of the Heat Dissipation Performance of a Lithium-Ion Battery Thermal Management System with CPCM/Liquid Cooling

A numerical study on a hybrid battery thermal management system based on PCM and wavy microchannel liquid cooling

Thermal performance of a hybrid cooling plate integrated with microchannels and PCM

A hybrid battery thermal management system coupling with PCM and optimized thermoelectric cooling for high-rate discharge condition

Thermal performance enhancement with snowflake fins and liquid cooling in PCM-based battery thermal management system at high ambient temperature and high discharge rate

A Compact Hybrid Battery Thermal Management System for Enhanced Cooling

Experimental and numerical study of lithium-ion battery thermal management system using composite phase change material and liquid cooling

A hybrid thermal management system with liquid cooling and composite phase change materials containing various expanded graphite contents for cylindrical lithium-ion batteries

Design and performance of a compact lightweight hybrid thermal management system using phase change material and liquid cooling with a honeycomb-like structure for prismatic lithium-ion batteries

Parameter optimization and sensitivity analysis of a Lithium-ion battery thermal management system integrated with composite phase change material

Fin structure and liquid cooling to enhance heat transfer of composite phase change materials in battery thermal management system

A novel thermal management system combining phase change material with wavy cold plate for lithium-ion battery pack under high ambient temperature and rapid discharging

Effects analysis on heat dissipation characteristics of lithium-ion battery thermal management system under the synergism of phase change material and liquid cooling method

Novel concept design of low energy hybrid battery thermal management system using PCM and multistage Tesla valve liquid cooling

Experimental Study of Battery Passive Thermal Management System Using Copper Foam-Based Phase Change Materials

Liquid Cooling with Phase Change Materials for Cylindrical Li-ion Batteries: an Experimental and Numerical Study

Experimental Investigation on the Thermal Performance of Heat Pipe-Assisted Phase Change Material Based Battery Thermal Management System

INVESTIGATION AND OPTIMIZATION OF A THERMAL MANAGEMENT SYSTEM FOR LITHIUM-ION BATTERIES COMBINING CLOSED AIR-COOLING WITH PHASE CHANGE MATERIAL