Abstract:Ni-rich layered oxides LiNi1-x M x O2 (x = 0.1-0.2, M = Ni, Co, Mn, Al, etc.) have been widely viewed as the next generation cathode materials for Li ion battery, due to their high capacities (>200 Ah/kg), high energy densities (>800 Wh/kg), high ionic diffusivity (10-8 cm2/s) and high electronic conductivity (10-1 S/cm).[1] However, these oxides have faced a big challenge of severe structural instability. Depending on different particle sizes, morphologies and doping/alloying treatments, the materials normally have 40%-80% capacity degradation after ~100 charging/discharging cycles. Based on traditional understanding of layered oxides, three main hypothesis[2-3] have been proposed within battery research community: 1) surface phase transition and interaction, 2) bulk phase transformation, and 3) mechanical degradation involving inter-grain crack formation. However, it is still not clear which mechanism is playing the dominating role during degradation of Ni-rich layered oxides. Unfortunately, due to lack of systematic theoretical study on the thermodynamic and kinetic process of degradation upon delithiation, the fundamental driving forces and the relative kinetics are poorly understood. Therefore, in this work, we report our recent results from atomic scale Density Functional Theory modeling, which carefully simulates the processes relevant to degradation of Ni-rich layered oxides, from which we have delivered significant theoretical understanding of the above mentioned three hypothesis. Furthermore, based on these theoretical understandings, we have performed experiments to validate the proposed surface modifications through both conventional wet chemistry coating and advanced particle Atomic Layer Deposition (ALD). These computational and experimental combined studies could provide us deeper understanding of degradation of Ni-rich layered oxides, and shed light on the future direction towards stabilized high energy cathode materials. [1] J. Xu, F. Lin, M. M. Doeff, W. Tong, J. Mater. Chem. A, 2017, 5, 874 [2] M. D. Radin, Y. S. Meng, A. Van der Ven, etc., Adv. Energy Mater. 2017, 1602888 [3] W. Li, B. Song, A. Manthiram, Chem. Soc. Rev., 2017, 46, 3006

Revealing the surface-to-bulk degradation mechanism of nickel-rich cathode in sulfide all-solid-state batteries

Well-dispersed single-crystalline nickel-rich cathode for long-life high-voltage all-solid-state batteries

Realizing Superior Cycling Stability of Ni-Rich Layered Cathode by Combination of Grain Boundary Engineering and Surface Coating

Elevating Cycle Stability and Reaction Kinetics in Ni‐Rich Cathodes Through Tailored Bulk and Interface Chemistry for Sulfide‐Based All‐Solid‐State Lithium Batteries

Surface to Bulk Design Empowering Ni-rich Layered Oxide Cathode in Sulfide-Based All-Solid-State Batteries

Enhancing Interfacial Stability in Sulfide All-Solid-state Batteries Through Surface Dual-Doping of Zr and F in Ni-rich Cathodes

Outstanding electrochemical performances of the all-solid-state lithium battery using Ni-rich layered oxide cathode and sulfide electrolyte

Insight into Cathode Surface to Boost the Performance of Solid-State Batteries

Mutual modulation between surface chemistry and bulk microstructure within secondary particles of nickel-rich layered oxides

Bulk and surface degradation in layered Ni-rich cathode for Li ions batteries: Defect proliferation via chain reaction mechanism

Surface Degradation of Single‐crystalline Ni‐rich Cathode and Regulation Mechanism by Atomic Layer Deposition in Solid‐State Lithium Batteries

Surface Engineering of Nickel-Rich Single-Crystal Layered Oxide Cathode Enables High-Capacity and Long Cycle-Life Sulfide All-Solid-state Batteries

Enabling Stable and High Areal Capacity Solid State Battery with Ni-rich Cathode Via Failure Mechanism Study

Bulk Fatigue Induced by Surface Reconstruction in Layered Ni-rich Cathodes for Li-ion Batteries

Unraveling Interfacial Compatibility of Ultrahigh Nickel Cathode and Chloride Solid Electrolyte for Stable All-Solid-state Lithium Battery

Sb-anchoring Single-Crystal Engineering Enables Ultra-High-ni Layered Oxides with High-Voltage Tolerance and Long-Cycle Stability

Unraveling the interfacial compatibility of ultrahigh nickel cathodes and chloride solid electrolyte for stable all-solid-state lithium batteries

Ab Initio Study on Surface Segregation and Anisotropy of Ni-Rich LiNi1–2yCoyMnyO2 (NCM) (y ≤ 0.1) Cathodes

Constructing A High-Energy And Durable Single-Crystal Ncm811 Cathode For All-Solid-State Batteries By A Surface Engineering Strategy

Synergistic Regulation of Kinetic Reaction Pathway and Surface Structure Degradation in Single-Crystal High-Nickel Cathodes

Theoretical Understanding and Experimental Suppression of the Capacity Degradation of Ni-Rich Layered Oxide Cathode Materials for Li Ion Battery