Abstract:Surface coatings are the best ways to protect materials from deterioration due to various aspects including corrosion and wear. However, after long-term oxidation, the high temperature oxidation resistance of TiAl-4Nb-1.5Mo (B, Y) alloy coated with NiCoCrAlY bond coating is weakened by the interfacial interdiffusion. Herein, the microstructure evolution, elements interdiffusion, and mechanical properties at the interface between TiAl alloy and NiCoCrAlY bond coating are analyzed through an isothermal oxidation experiment at 950 °C. Results show that the coarsening and coalescence of the β phase occur in the bond coating during high temperature oxidation. Meanwhile, the thickness of the bond coating decreases linearly before oxidation for 100 h. As the oxidation time increases, the consumption rate of the bond coating slows down. Based on the Layer-by-layer phase composition analysis, it is found that the interdiffusion zone forms three layers in sequence: NiAl and Al (Ni, Co)2Ti, AlNi2Ti(Nb, Mo) and Ti3Al, and Al3NiTi2 and TiAl. The TiN phase segregated around the α-Cr as well as the enriched Y element led to generation of microcracks. The TiN phase forms at the phase boundary between the β and γ phases after 250 h of oxidation. The layer composed of AlNi2Ti(Nb, Mo) and Ti3Al phase exhibits a severe hardening phenomenon, which may reduce the long-term service life of the TiAl alloy coated with NiCoCrAlY bond coating.

Enhanced Structural Stability and Oxidation Resistance of NiCoCrAlY Bonding Layer Via Al Addition

Influences of MCrAlY Coatings and TBCs on Oxidation Behavior of a Ni-Based Single Crystal Superalloy

Effect of Depositing Al on High-Temperature Oxidation Behavior of NiCrAlY Bond

On the Oxidation and Interdiffusion Behavior of an AlCoCrFeNiY High-Entropy Alloy Bond Coat on a Directionally Solidified Ni-based Superalloy

Effect of Y-doping on the microstructural evolution and oxidation resistance of NiAlHf coatings at 1200 °C

Mechanical Properties and Oxidation Characteristics of TiNiAl(Nb) Intermetallics

A comparative study on the oxidation behavior of Y-, Hf- and YHf-doped NiCoCrAl alloys: effect of reactive elements

Microstructure and Oxidation Behavior of NiCoCrAlY Coating with Different Sm2O3 Concentration on TiAl Alloy

Improved oxidation resistance of γ-TiAl intermetallics by sputtered Ni+CrAlYHfSiN composite coating

Interdiffusion mechanism at the interface between TiAl alloy and NiCoCrAlY bond coating

Co-doping Effect of Hf and Y on Improving Cyclic Oxidation Behavior of (ni,pt)al Coating at 1150 °C

Investigation on the Oxidation Behavior of the NiCrAlY Bond-Coat with Low Al Content Sprayed by High Velocity Oxygen Fuel Method

Effects of High Al Content on the Phase Constituents and Thermal Properties in NiCoCrAlY Alloys

Effect of Al content on the oxidation behavior of NiCoCrAlYHf alloys at 1100°C

Microstructure Evolution and Cyclic Oxidation Performance of Cr2AlC As Active Diffusion Barrier for NiCrAlY Coating on TiAl Alloy

Effects of alloying elements on the electronic structure and ductility of NiAl compounds investigated by X-ray absorption fine structure

Effect of Alloyed Lu, Hf and Cr on the Oxidation and Spallation Behavior of NiAl

High-temperature oxidation behaviour of TiAl alloys with Co addition

Microstructure evolution and cyclic oxidation performance of Cr2AlC transition layer as active diffusion barrier for Ni-based superalloy and NiCrAlY coating

Effect of Dysprosium Addition on the Cyclic Oxidation Behaviour of CoNiCrAlY Alloy

Microstructure and Cyclic Oxidation of a Hf-doped (ni,pt)al Coating for Single-Crystal Superalloys