Abstract:In this paper, a combination of experimental techniques and numerical simulations were used to investigate the mechanical behavior of the -MAX phase-reinforced aluminum metal matrix composites prepared by hot press sintering and the high purity -MAX phase was synthesized through pressureless sintering, followed by an in-depth microstructure and mechanical properties analysis. This was carried out using various techniques, including metallographic microscopy, scanning electron microscopy, XRD, microhardness testing, universal mechanical testing and finite element analysis. In order to model the compressive deformation behavior of the /Al composite, a meso-structure-based finite element model of 3D cylindrical representative volume element was implemented. The comprehensive results of the finite element simulation are in agreement with the experimental data. It was proved that the constructed 3D cylindrical model and the composed constitutive equation can accurately predict the deformation and damage behavior of Ti 3 AlC 2 /Al under axial compression. This analysis showed that the particles were uniformly distributed within the Al matrix, forming a hard and continuous framework and enhancing the compressive strength and microhardness of the processed composite. In addition, this research examined the impact of different volume fractions and sizes of -MAX phase particles on the properties of composites. The composite with 20% volume fraction of reinforcement exhibited the highest yield strength and microhardness of 292.31 MPa and 155 HV, respectively. However, above 20% reinforcement phase, a weakening of the bond strength at the composite matrix interface, an increase in voids and defects and a consequent reduction in the mechanical properties of the processed composite were observed.

Revealing the role of micropore defects in tensile deformation of a B4Cp/Al composite using an actual three-dimensional model

Micromechanical Simulation on Strength and Ductility of Two Kinds of Al-based Nanostructural Materials

Influence of particulate B4C with high weight fraction on microstructure and mechanical behavior of an Al-based metal matrix composite

Micromechanical Modeling of Damage Evolution and Mechanical Behaviors of CF/Al Composites under Transverse and Longitudinal Tensile Loadings.

An effective multiscale analysis for the mechanical properties of 3D braided composites considering pore defects

3D Orthogonal Woven Carbon/Carbon Composites: Micromechanical Modeling and Damage Analysis

Deformation and fracture of SiCp/Al composites under complex loading conditions: A simulation study

An Insight into the Mechanical Properties of Unidirectional C/C Composites Considering the Effect of Pore Microstructures via Numerical Calculation

A new progressive damage model for predicting the tensile behavior of the three-dimensional woven carbon/carbon composites using micromechanics method

Microstructure-Based Modeling of the Dynamic Behaviors of SiCp/7075Al Composites

Meso-structure-Based Numerical Simulations of Deformation and Damage of Ti3AIC2/Al Composites by 3D Cylinder Model under Axial Compression

Damage behavior and mechanism of SiCp/Al composites under biaxial tension

A Microcracking-Based Model for the Dynamic Failure of Carbon/carbon Composites

3D multiscale tri-level finite element analysis of aluminum matrix composites with Nano&Micro hybrid inclusions

Modeling damage evolution of graphene/aluminum composites considering crystal cracking and interface failure

Micromechanical Analysis of SiC/Ti6Al4V Composite Under Complex Stress State

Effect of Manufacturing Defects on Mechanical Properties and Failure Features of 3D Orthogonal Woven C/C Composites

Effect of Microcracks on the Tensile Properties of 3D Woven Composites

A micromechanical damage model for oxide/oxide ceramic matrix composites with hierarchical porosity under thermomechanical loading

Numerical modeling and failure evolution of microstructure-based in-situ TiB2 and TiC+TiB2 reinforced Cu matrix composites

EFFECTS OF AS-RECEIVED DEFECTS ON CERAMIC MATRIX COMPOSITES PROPERTIES USING HIGH- FIDELITY MICROSTRUCTURES WITH PERIODIC BOUNDARY CONDITIONS