Abstract:The relationship among raw materials used, processing conditions, the resulting morphology, and mechanical properties were studied for unidirectional (1D), bidirectional (D) and tridirectional (3D) carbon-carbon composites. Experimental results demonstrated that an increased number of densifications and higher composite densities were associated with elevated strength properties. Generally, tensile and flexural properties were found to be fiber-dominated, whereas compression behavior was mainly affected by density and matrix morphologies. Tensile moduli of 1D and 3D composites were found to be higher than values calculated according to the fibers' content. This was attributed to the contribution of the sheath matrix morphology. Tensile strength levels were significantly lower than expected because of residual stresses resulting from thermal processing. With respect to matrix effects, measured properties indicated that high glass-like carbon fraction resulted in enhanced strength and modulus, both in tension and compression. Microstructure observations indicated that higher matrix packing density contributed to this result. Pitches containing heavy fractions gave rise to increased compression strength, whereas light fraction types of pitches displayed higher tensile strength, because of different matrix morphologies in each case. Atmospheric pressure carbonization of 3D composites resulted in void-containing matrix with almost no sheath morphology. Consequently, the associated mechanical properties were inferior. Distinctively, atmospheric pressure carbonization of 1D and 2D composites is quite effective in sheath morphology formation. Consequently, mechanical properties are only slightly inferior to those of the high-pressure densified composites. Finally, it was observed that graphitization tended to reduce strength and enhance modulus, compared to only carbonized composites. Non-sequentially graphitized 3D composites are disadvantageous, compared with composites graphitized following each densification. The duration of graphitization tended to reduce compression strength with longer processes.

Pyrimidine derivatives. 4. Synthesis and antihypertensive activity of 4-amino-2-(4-cinnamoylpiperazino)-6,7-dimethoxyquinazoline derivatives.

Interaction of Multiple Micro-Defects on the Strength and Failure Mechanism of UD Composites by Computational Micromechanics

Investigation on the Effects of Microstructure on Machining Unidirectional Carbon Fiber Reinforced Polymer Composites with a Modified Force Model

Effect of Manufacturing Defects on Mechanical Properties and Failure Features of 3D Orthogonal Woven C/C Composites

Effect of Random Void Defects on the Mechanical Behavior of C/C Braided Composites

Influence of hierarchical porosity on the mechanical properties of porous woven composites under thermomechanical loading

An effective multiscale analysis for the mechanical properties of 3D braided composites considering pore defects

Numerical evaluation of effective elastic properties of CVI-C/C composites considering anisotropic matrix

Effect of void defects on mechanical behavior and failure features of C/C honeycomb structure

Micromechanical modeling of longitudinal compression behavior and failure mechanism of unidirectional carbon fiber reinforced aluminum composites involving initial fiber misalignment

Effect of microstructure evaluation during the PIP process on macroscopic properties of C/C composites

Evaluation of porosity effects on the mechanical properties of carbon fiber-reinforced plastic unidirectional laminates by X-ray computed tomography and mechanical testing

Numerical mapping relationship between process parameters and mechanical properties of unidirectional carbon/carbon composites

Micromechanical Modeling of Damage Evolution and Mechanical Behaviors of CF/Al Composites under Transverse and Longitudinal Tensile Loadings.

A Microcracking-Based Model for the Dynamic Failure of Carbon/carbon Composites

Effect of resin-rich areas on failure behavior of unidirectional CFRP under transverse pure shear

The effects of interphase parameters on transverse elastic properties of Carbon–Carbon composites based on FE model

Interfacial effect on mechanical behaviors of bidirectional-fiber-reinforced composites

Effects of various porosities on the damage evolution behavior of carbon fiber/epoxy composites using acoustic emission and micro-CT

A simplified micromechanical model for predicting effective mechanical behaviors of continuous bidirectional-fiber-reinforced composites

Effect of materials and processing on the mechanical properties of C/C composites