Effects of Counterion Type on Selective Arsenic Removal Process Combining Standard Anion Exchange Resin with Electrocoagulation for Polluted Groundwater

Shida Li,Xiaoying Yang,Zhixuan Wang,Shoupeng Duan,Shaokui Zheng,Xiangnan Zheng
DOI: https://doi.org/10.1016/j.jclepro.2022.135762
IF: 11.1
2023-01-01
Journal of Cleaner Production
Abstract:This study achieved the highly selective removal of trace arsenic (As) from groundwater (110 mu g L-1 As) by the standard anion exchange resin (AER) column process during long-term exhaustion-regeneration cyclic operation by optimizing the sulfate equivalent fraction (0.97 or 0.875) in sulfate-chloride or sulfate-bicarbonate binary brine (chloride or bicarbonate as counterion). No significant (<5%) or low (maximum: 25%) sulfate removal from the feedwater were stably observed during the 20 or 21 exhaustion-regeneration cycles without brine treatment or replacement, when <10 mu g L-1 As was consistently observed in the product water. Furthermore, this study demonstrated the selective As removal from As-rich sulfate-chloride or sulfate-bicarbonate spent brine by aluminum (Al)- or iron (Fe)-based chemical coagulation or electrocoagulation process. Fe-based electrocoagulation (9-cm interelectrode distance, 0.50 mA cm-2, 15 min) and sulfate-chloride binary brine are finally recommended after metal dosage, sludge production and residual metal concentration among them were compared. No electrocoagulation took place in the sulfate-bicarbonate spent brine even at a current density of 3 mA cm-2 because of high bicarbonate concentration that formed passivation film on the anode surface. Finally, a combined process including a standard AER column and spent brine electrocoagulation was developed to achieve the stability and high As-selectivity of 114 exhaustion-regeneration cycles.
What problem does this paper attempt to address?