Abstract:The rock formations in oil and gas reservoirs are predominantly composed of laminated shale, which contains various defects such as pores and fractures. These defects have a significant impact on the stability of wellbore walls. As a result, this study utilized rock samples from a specific oil and gas reservoir and introduced pre-existing pore and fracture defects within them. Uniaxial compression tests were conducted on rock specimens with varying angles between the fractures and the bedding planes. The study involved measuring and analyzing the impact of pre-existing defect morphology on shale’s mechanical properties. Additionally, through the use of digital image correlation (DIC) technology, a comprehensive strain field map was obtained, depicting the initiation, propagation, and ultimate failure of surface cracks in shale under loading conditions. This allowed for both qualitative and quantitative analysis of the connection between shale’s damage and failure processes and the evolution of strain fields. Ultimately, this research provides a theoretical basis for wellbore stability and the development of shale oil and gas fields. Conclusions drawn from the study are as follows. With an increase in fracture angle, the rock’s elastic modulus gradually increases, and both compressive strength and strain exhibit a pattern of higher values on both ends and lower values in the middle. When the fracture angle is less than 30°, significant stress concentration occurs at the tip of the fracture. When the angle exceeds 60°, stress concentration around pores dominates. In the range of 30° to 60°, there is a combined stress concentration around both pores and fractures, significantly reducing rock stability. Crack propagation is influenced by bedding planes and exhibits varying degrees of ductility, ultimately resulting in a tension-shear mixed failure. When fractures are parallel to bedding planes (angle = 0°), defects are symmetrically distributed, and stress concentration at the fracture tip dominates, leading to crack initiation from the fracture tip and eventually forming an “H”-shaped tensile failure. When fractures are perpendicular to bedding planes (angle = 90°), stress concentration around pores is greater than at the fracture tip, causing cracks to initiate around pores and eventually collapsing on one side of the fracture.

Investigation of the Effect of Initial Structure and Loading Condition on the Deformation, Strength, and Failure Characteristics of Continental Shale

Influence of Natural Fractures and Laminae on Fracture Propagation and Failure Mode of Continental Shale

Study on the Damage and Failure Process of Prefabricated Hole-Fracture Combination Defects in Shale

Anisotropic Characterization of Mechanical Behavior and Fracture Morphology in Marine and Continental Shales under Uniaxial Compression: A Comparative Analysis

Cracking Evolution and Failure Characteristics of Longmaxi Shale Under Uniaxial Compression Using Real-Time Computed Tomography Scanning

Fracture propagation and failure mode characteristics of lamellar lacustrine shale under true triaxial compression conditions

Anisotropic Mechanism and Characteristics of Deformation and Failure of Longmaxi Shale

Experimental Investigation on the Fracture Behaviour of Black Shale by Acoustic Emission Monitoring and CT Image Analysis During Uniaxial Compression

Effect of Microstructure Heterogeneity on Shale Strength: Insights from Micro-CT Imaging and Numerical Simulations

Investigation on Mechanical Properties, AE Characteristics, and Failure Modes of Longmaxi Formation Shale in Changning, Sichuan Basin, China

Experiment and Discrete Element Modelling on Strength, Deformation and Failure Behaviour of Shale under Brazilian Compression

Brittle Failure of Shale under Uniaxial Compression

Anisotropic Strength and Failure Behaviors of Transversely Isotropic Shales: an Experimental Investigation

Experimental study on crack propagation and failure mode of fissured shale under uniaxial compression

Experimental Study on Anisotropic Strength and Deformation Behavior of a Coal Measure Shale under Room Dried and Water Saturated Conditions

Nanoscale mechanical property variations concerning mineral composition and contact of marine shale

Investigation on the Failure Characteristics and Fracture Classification of Shale Under Brazilian Test Conditions

The Mechanical Properties and Fracture Characteristics of Shale Layered Samples from the Lucaogou Formation Considering Natural Crack and Mineral Distribution

Experimental study of mechanical behaviours of shale under different confining pressures and different strain rates

Study on Mechanical Characteristics and Damage Mechanism of the Longmaxi Formation Shale in Southern Sichuan Basin, China

Effects of Bedding Geometry and Cementation Strength on Shale Tensile Strength Based on Discrete Element Method