Abstract:Large-aperture and long focal-length lens is widely used in high energy laser system. The method based on Talbot interferometry is a reliable method to measure the focal length of such elements. By employing divergent beam and two gratings of different periods, this method could realize full-aperture measurement, higher accuracy and better repeatability. However, it does not take into account the spherical aberration of the measured lens resulting in the moire fringes bending, which will introduce measurement error. Furthermore, in long-focal measurement with divergent beam, this error is an important factor affecting the measurement accuracy. In this paper, we propose a new spherical aberration compensation method, which could significantly reduce the measurement error. Characterized by central-symmetric scanning window, the proposed method is based on the relationship between spherical aberration and the lens aperture. Angle data of moire fringes in each scanning window is retrieved by Fourier analysis and statistically fitted to estimate a globally optimum value for spherical-aberration-free focal length calculation. Simulation and experiment have been carried out. Compared to the previous work, the proposed method is able to reduce the relative measurement error by 50%. The effect of scanning window size and shift step length on the results is also discussed.

Measurement and Correction of the Macrolens Array's Position Error in Integral Imaging

Calibration for the Errors Resulted from Aberration in Long Focal Length Measurement

Spherical Aberration Compensation Method for Long Focal-Length Measurement Based on Talbot Interferometry

Registration Error Analysis and Evaluation in Large-Volume Metrology System

A Positional Misalignment Correction Method for Fourier Ptychographic Microscopy Based on the Quasi-Newton Method with a Global Optimization Module

High-Accuracy Correction of a Microlens Array for Plenoptic Imaging Sensors.

Correction Model for Microlens Array Assembly Error in Light Field Camera

Position Error Correction Of Large-Aperture Aspherical In-Position Measurement

Identification and correction of microlens array rotation error in plenoptic imaging systems

Lighting Deviation Correction for Integrating-Sphere Multispectral Imaging Systems.

Calibration of an integral imaging system with a lenslet array

LED Array Microscopy System Correction Method with Comprehensive Error Parameters Optimized by Phase Smoothing Criterion

Real-time MTF Measurement System for Projection Lens

Development of a Light Field Measuring System with Corrected Distortion Based on Imaging Analysis.

Local Error and Its Identification for Microlens Array in Plenoptic Camera

Air Flow Turbulence Orthogonality and Surface Error Estimation in Large Aperture Optical Testing

Study on positioning accuracy assessment model and geometric errors for single-linear-array CCD camera

A Study of Correction to the Point Cloud Distortion Based on MEMS LiDAR System

Calibrating the Orientation Between A Microlens Array and A Sensor Based on Projective Geometry

Influence of microlens array manufacturing errors on light-field imaging