Experimental Study of Ignition Process Caused by Poor Electrical Contact of Connecter
Chaoying Li,Zehua Yang,Wenbin Yao,Kaiyu Zou,Haidong Liu,Jin Lin,Shouxiang Lu
DOI: https://doi.org/10.1016/j.psep.2024.07.006
IF: 7.8
2024-01-01
Process Safety and Environmental Protection
Abstract:Poor electrical connections contribute to electrical fires. The ignition process due to poor electrical contacts was studied and revealed the triggering mechanisms at crucial stages. By manipulating the contact resistance to simulate real-world poor connection scenarios, three distinct stages were identified in the ignition process. Stage I, referred to as temperature rise and pyrolysis, is attributed to high resistance at electrical contacts. Stage II, referred to as arc-accelerated pyrolysis, is the complete formation of a carbonized path due to insulation breakdown, and Stage III, referred to as ignition and combustion, is the ignition of pyrolysis gases by the arc on the carbonized path. The duration of Stages I and II is strongly correlated with the electrical contact power ( (center dot) Q cR ) and the arc power ( Q arc ). The transition from Stage I to Stage II occurs at a critical electrical contact power of 35 W. Two critical thresholds exist for the transition from Stage II to Stage III: an ignition threshold Q arc1 (about 50 W), and an extremely easy ignition threshold Q arc2 (about 250 W), both determined by the initial fire core control volume energy formed by pyrolysis gases and the arc, and by the surrounding environment. Fault development pathways in electrical connectors and key parameter changes were identified, providing support for enhancing electrical safety inspections and risk prevention strategies.