Abstract:Anode free Li metal battery (AFLMB) are being intensively investigating in recent years as a means to achieve higher capacity when compared with standard Li metal batteries. However, the severe electrolyte decomposition during plating/stripping cycles, that causes fast Li dendrite growth and quick capacity fading, is challenging for its commercialization. Herein, poly (vinylidene fluoride-hexafluoropropylene) polymer containing Li 1.6 Al 0.4 Mg 0.1 Ge 1.5 (PO 4 ) 3 ceramic filler (90:10 w% ratio, PVDF-HFP-10) gel polymer electrolyte (GPE) is employed for the first time in AFLMB to suppress the Li dendrite growth and homogeneous Li deposition is achieved during Li metal plating/stripping. The PVDF-HFP-10 based membrane is manufactured using electrospinning technique, which is well known and effective technique to increase the amount of crystalline β-phase of PVDF-HFP, on Cu collector foil. Particularly, a pure crystalline β-phase of PVDF-HFP has been observed in the adhesion layer sticked with Cu collector as confirmed from the analysis of Fourier Transform Infrared Spectroscopy (FTIR) and Raman spectroscopy measurements. The adhesion layer is further investigated using X-ray absorption spectroscopy (XAS), grazing angle X-ray diffraction (GAXRD) and X-ray photoelectron spectroscopy (XPS) techniques. The GAXRD analysis reveals Cu collector undergoes slight reconstruction of its (100) facets surface to (200) facets in the presence of the adhesion layer. Moreover, depth XPS analysis confirmed that the alignment of F atoms in the adhesion layer is toward the Cu collector which can play an important role for homogeneous Li deposition. Based on these findings, a novel approach is developed to prepare GPE, without peeling off the electrospun PVDF-HFP membrane from Cu collector to take advantage of the adhesion layer. The electrospun PVDF-HFP membrane GPE unpeeled off from its Cu collector (Cu@PVDF-HFP-10) prepared using novel method provides bifunctional applications, as electrolyte and as an artificial solid-electrolyte interphase (ASEI). The strong electrostatic interaction between the fiber sheet and its collector foil forms an adhesion layer (⁓0.5μm) which acts as ASEI prevents electrolyte decomposition. The Cu@PVDF-HFP-10|Li anode free cell enables uniform and highly compacted Li platting, excellent electrochemical performance, and high coulombic efficiency (CE) even at a high current density up to 5 mA cm − 2 (CE, 97.14%) after 200 cycles using 2 mAh cm − 2 capacity loading. Conversely, nonuniform and thick Li deposition is observed in the GPE prepared by conventional method (PVDF-HFP-10), due to poor contact between the membrane and the electrode, achieved only 90.08% CE after 100 cycles at 5 mA cm − 2 . Post-cycling analyses using titration- gas chromatography ( TGC ) and XPS techniques indicated that the new strategy is conducive to prevent dead Li metal formation as well as to create a carbonate-free, robust, and stable SEI convenient to develop sustainable AFLMB system. Cycling performance of the Cu@PVDF-HFP-10 GPE utilized in the Cu|NMC AFLMB configuration delivered much better electrochemical performance than the PVDF-HFP-10 GPE (prepared by traditional method) and organic liquid electrolytes.

Cellulose-based Gel-Type Electrolyte Fabricated by Lyophilization to Enable Uniform Li+ Ion Flux Distribution for Stable Li Metal Anodes with High-Rate Capability

In Situ High‐performance Gel Polymer Electrolyte with Dual‐reactive Cross‐linking for Lithium Metal Batteries

Nonporous Gel Electrolytes Enable Long Cycling at High Current Density for Lithium-Metal Anodes.

Multiscale Structural Gel Polymer Electrolytes with Fast Li+ Transport for Long‐Life Li Metal Batteries

A gel polymer electrolyte obtained from cellulose acetate/polyvinylidene fluoride composite electrospun membrane for safe lithium metal batteries with high-rate capability

A cleverly designed asymmetrical composite electrolyte via in-situ polymerization for high-performance, dendrite-free solid state lithium metal battery

1 μm‐Thick Robust Gel Polymer Electrolyte with Excellent Interfacial Stability for High‐Performance Li Metal Batteries

An efficient gel polymer electrolyte for dendrite-free and long cycle life lithium metal batteries

3D hierarchical biobased gel electrolyte with superior ionic conductivity and flame resistance for suppressing lithium dendrites via alloying and sieving mechanisms

Rational Design of Sandwich-Like “Gel–Liquid–Gel” Electrolytes for Dendrite-Free Lithium Metal Batteries

A Smart Lithiophilic Polymer Filler In Gel Polymer Electrolyte Enables Stable And Dendrite-Free Li Metal Anode

A Biobased Composite Gel Polymer Electrolyte with Functions of Lithium Dendrites Suppressing and Manganese Ions Trapping

A lithiated gel polymer electrolyte with superior interfacial performance for safe and long-life lithium metal battery

A two-step strategy for constructing stable gel polymer electrolyte interfaces for long-life cycle lithium metal batteries

Electrospun polyimide/cellulose acetate propionate nanofiber membrane-based gel polymer electrolyte with fast lithium-ion transport and high interface stability for lithium metal batteries

Lithium Dendrite Growth Suppression in Anode-Free Lithium Battery Using Bifunctional Electrospun Gel Polymer Electrolyte Membrane

Interconnected Three-Dimensional Porous Alginate-Based Gel Electrolytes for Lithium Metal Batteries

A Compact Gel Membrane Based on a Blend of PEO and PVDF for Dendrite-Free Lithium Metal Anodes

A Tough, Elastic Ion Gel with Adaptive Interface for High Performance and Safe Lithium Metal Anodes

Long cycling, thermal stable, dendrites free gel polymer electrolyte for flexible lithium metal batteries

High-strength Internal Crosslinking Bacterial Cellulose Network Based Gel Polymer Electrolyte for Dendrite-suppressing and High-rate Lithium Batteries†.