Abstract:Under the operating conditions of high power and high switching frequency, an insulated gate bipolar transistor (IGBT) chip can produce relatively large power loss, causing the junction temperature to rise rapidly; consequently, the reliability of the IGBT module can be seriously affected. Therefore, it is necessary to accurately predict the junction temperature of the IGBT chip. The resistance capacitance (RC) thermal network model is a commonly used method for IGBT junction temperature prediction. In this paper, the model parameters are obtained by two methods to establish the Cauer thermal network models of the IGBT module. The first method is to experimentally obtain the transient thermal impedance curve of the IGBT module and the structure function and then extract the individual thermal parameters of the Cauer thermal network model; the second method is to obtain the thermal parameters of the thermal network model directly by using theoretical formulas that consider the influence of the heat spreading angle. The predicted junction temperatures of the Cauer thermal network models established by the two methods are compared with the junction temperatures obtained from infrared (IR) measurements during the power cycling test, the junction temperatures measured by the temperature-sensitive electrical parameter (TSEP) method, and the junction temperatures calculated by finite element (FE) analysis. Additionally, the Cauer thermal network models established by the two methods are compared and verified. The results indicate that the Cauer thermal network model established based on theoretical formulas can accurately predict the maximum junction temperature of the IGBT chip, and the calculated temperature for each layer, from the IGBT chip layer to the ceramic layer, also accords well with the FE results. The Cauer thermal network model established based on the experimental test and the structure function can accurately predict the average junction temperature of the IGBT chip.

An ANN-based Wide Temperature Range Electro-thermal Model for InP HBT with the Thermal Factor Consideration

An Artificial Neural Network Model for Electro-Thermal Effect Affected Hot Carrier Injection Reliability in 14-nm FinFETs

A Knowledge-Guided Neural Network-Based Large-Signal Model for InP HBTs with Self-Heating Effect Consideration

Thermal-Fluid Co-Simulation and Modelling of IGBT with Thermal Resistance Network

Electrothermal Effects on Performance of GaAs HBT Power Amplifier During Power Versus Time (PVT) Variation at GSM/DCS Bands

Physics-Based Electrothermal Stress Evaluation Approach of IGBT Modules Combined with Artificial Neural Network Model

A Network Topological Approach-Based Transient 3-D Electrothermal Model of Insulated-Gate Bipolar Transistor

Temperature behavior modeling based on resilient BPNN for a GaAs pHEMT high gain MMIC PA

Accurate Modeling Of Phemt Output Current Derivatives Over A Wide Temperature Range

Characteristics prediction and optimization of InP HBT using machine learning

A Neural Network Modeling Approach to Power Amplifiers Taking into Account Temperature Effects

A Neural Network Model for Electro-thermal Effect Affected Hot Carrier Injection Reliability in N-Type Nanoscale MOSFETs

Advanced Electro-Thermal Spice Modelling of Large Power Igbts

An Equivalent Dipole Model Hybrid with Artificial Neural Network for Electromagnetic Interference Prediction

A 3-D Temperature-Dependent Thermal Model of IGBT Modules for Electric Vehicle Application Considering Various Boundary Conditions

Artificial Intelligence-Aided Thermal Model Considering Cross-Coupling Effects

An improved noise model of InP HEMT for millimeter wave application

Modeling of CMOS Transistors from 0.18 Μm Process by Artificial Neural Network

A Verilog-A Large Signal Model for InP DHBT Including Thermal Effects

An Aging Small-signal Modeling Method of Microwave Transistors Using GA-ELM Neural Network

Comparative Study of the Parameter Acquisition Methods for the Cauer Thermal Network Model of an IGBT Module