Abstract:The metallic interconnects are essential components of energy devices such as fuel cells and electrolysis cells, batteries, as well as electronics and optoelectronic devices. In recent years, 3D printing processes have offered complementary routes to the conventional photolithography- and vacuum-based processes for interconnect fabrication. Among these methods, the confined electrodeposition (CED) process has enabled a great control over the microstructure of the printed metal, direct printing of high electrical conductivity (close to the bulk values) metals on flexible substrates without a need to sintering, printing alloys with controlled composition, printing functional metals for various applications including magnetic applications, and for in situ scanning electron microscope (SEM) nanomechanical experiments. However, the metal deposition rate (or the overall printing speed) of this process is reasonably slow because of the chemical nature of the process. Here, we propose using the CED process to print a single layer of a metallic trace as the seed layer for the subsequent selected-area electroless plating. By controlling the activation sites through printing by the CED process, we control, where the metal grows by electroless plating, and demonstrate the fabrication of complex thin-film patterns. Our results show that this combined process improves the processing time by more than 2 orders of magnitude compared to the layer-by-layer printing process by CED. Additionally, we obtained Cu and Ni films with an electrical resistivity as low as ∼1.3 and ∼2 times of the bulk Cu and Ni, respectively, without any thermal annealing. Furthermore, our quantitative experiments show that the obtained films exhibit mechanical properties close to the bulk metals with an excellent adhesion to the substrate. We demonstrate potential applications for radio frequency identification (RFID) tags, for complex printed circuit board patterns, and resistive sensors in a Petri dish for potential biological applications.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.1c01890?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.1c01890</a>.SEM images of the single-layer printed Cu and Ni lines with a nozzle diameter of ∼250 μm for different nozzle speeds; The optical images of single-layer Cu and Ni lines printed with different nozzle speeds, and the width and thickness of the printed Cu and Ni lines vs the nozzle speed; The FIB-sectioned cross-sectional images of Cu and Ni films; and The schematic of an unpinned (top) and pinned (bottom) indentation-induced buckle (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c01890/suppl_file/am1c01890_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Rapid Preparation of Patterned Conductive Films Based on in Situ Voltaic Cell Templated 3D Controllable Metal Deposition

Custom Writing Catalytic Tracks for Selective Pattern Metallization on Flexible Substrate

Microdeposition of 3D Structure on F Ilm Surface Using Micropipette

Fabrication of Conductive Copper Patterns Using Photocatalyst-activated Electroless Deposition

Direct Fabrication Of High-Resolution And High-Performance Flexible Electronics Via Surface-Activation-Localized Electroless Plating

Facile and Rapid Method for Fabricating Liquid Metal Electrodes with Highly Precise Patterns via One‐Step Coating

Adhesion-Enhanced Flexible Conductive Metal Patterns on Polyimide Substrate Through Direct Writing Catalysts with Novel Surface-Modification Electroless Deposition

Highly-facile template-based selective electroless metallization of micro- and nanopatterns for plastic electronics and plasmonics

Beyond Conventional Patterns: New Electrochemical Lithography with High Precision for Patterned Film Materials and Wearable Sensors.

Interconnect Fabrication by Electroless Plating on 3D-Printed Electroplated Patterns

3D Porous Polysiloxane Ion-Adsorption Films for Additive Fabrication of Conductive Patterns with High Adhesion

Electroless Plating Cycle Process for High-Conductivity Flexible Printed Circuits

Preparation of Selective Conductive Copper Patterns by Pen-on-paper Writing Combined with Electroless Plating

Direct writing patterns for electroless plated copper thin film on plastic substrates

Additive Preparation of Conductive Circuit Based on Template Transfer Process Using a Reusable Photoresist

Scalable Strategy to Directly Prepare 2D and 3D Liquid Metal Circuits Based on Laser-Induced Selective Metallization

Patternable, High-Precision, Controllable Wettability Copper Layers for 3D Resin-Based Weather-Resistant Electronics and 3D Liquid Manipulation

Site-selective Fabrication of Patterned Transparent Copper Mesh on Flexible Substrates at Mild Temperature for Green, Low Cost Electronics

Fabrication of copper patterns on flexible substrate by patterning-adsorption-plating process.

Efficient and Simple Fabrication of High-Strength and High-Conductivity Metallization Patterns on Flexible Polymer Films

Generation of Metal Patterns by Topography-Directed Deposition