Abstract:Generally, many beamforming methods are derived under the assumption of white noise. In practice, the actual underwater ambient noise is complex. As a result, the noise removal capacity of the beamforming method may be deteriorated considerably. Furthermore, in underwater environment with extremely low signal-to-noise ratio (SNR), the performances of the beamforming method may be deteriorated. To tackle these problems, a noise removal method for uniform circular array (UCA) is proposed to remove the received noise and improve the SNR in complex noise environments with low SNR. First, the symmetrical noise sources are defined and the spatial correlation of the symmetrical noise sources is calculated. Then, based on the preceding results, the noise covariance matrix is decomposed into symmetrical and asymmetrical components. Analysis indicates that the symmetrical component only affect the real part of the noise covariance matrix. Consequently, the delay-and-sum (DAS) beamforming is performed by using the imaginary part of the covariance matrix to remove the symmetrical component. However, the noise removal method causes two problems. First, the proposed method produces a false target. Second, the proposed method would seriously suppress the signal when it is located in some directions. To solve the first problem, two methods to reconstruct the signal covariance matrix are presented: based on the estimation of signal variance and based on the constrained optimization algorithm. To solve the second problem, we can design the array configuration and select the suitable working frequency. Theoretical analysis and experimental results are included to demonstrate that the proposed methods are particularly effective in complex noise environments with low SNR. The proposed method can be extended to any array.

Efficient Adaptive Beamforming of Underwater Acoustic Target under Impulsive Noise

Joint Passive Detection and Tracking of Underwater Acoustic Target by Beamforming-Based Bernoulli Filter with Multiple Arrays.

A Real-Time 3-D Underwater Acoustical Imaging System

Robust Adaptive Beamforming Based on Particle Filter with Noise Unknown

Cross Power Spectral Density Based Beamforming for Underwater Acoustic Communications

Adaptive beamforming for array signal processing in aeroacoustic measurements.

Robust adaptive beamforming in impulsive noise environments with unknown statistics

Multi-Frequency Transmitting Beamforming Algorithm Based on Cross Array

Time-frequency Analysis for Underwater Acoustic Signals Based on Wideband Beamformer Outputs

Robust adaptive beamforming for impulse noise environments

Experimental Research of Multi-beam Forming of an Underwater Acoustic Array

A High-Resolution and Low-Frequency Acoustic Beamforming Based on Bayesian Inference and Non-Synchronous Measurements

An Underwater Acoustic Imaging Method Using Non-Sinusoidal Signals

Multiplication-Based Pulse Integration for Detecting Underwater Target in Impulsive Noise Environment

Observer-based Beamforming Algorithm for Acoustic Array Signal Processing

Convex Optimization Based Robust Adaptive Beamforming for Underwater Sensor Array

Bayesian Iterative Channel Estimation and Turbo Equalization for Multiple-Input-Multiple-Output Underwater Acoustic Communications

Robust Adaptive Beamforming Based on Interference-Plus-Noise Covariance Matrix Reconstruction Method

Underwater Target Detection Based on Fourth-Order Cumulant Beamforming.

Robust Blind Beamforming in Impulse Noise Environments

A Noise Removal Method For Uniform Circular Arrays In Complex Underwater Noise Environments With Low Snr