Abstract:Acoustic beamforming is a technique to measure the sound field and then achieve the localization of the sound sources. It usually works at a high frequency because the size and density of the microphone array are limited. Differing from the traditional beamforming, non-synchronous measurements beamforming can widen the working frequency bandwidth with a movable microphone array. It generates a cross-spectral matrix of all the microphones in the sequential positions of measurements, and this matrix is incomplete due to the missing phase relationships between non-synchronous measurements. Thus the non-synchronous measurements beamforming can be regarded as a cross-spectral matrix completion problem. One application of the non-synchronous measurements beamforming is that it can immediately obtain a completed noise image by scanning a large sound source; then the primary sound sources are expected to be identified by the global image. However, it is still a challenge for the current non-synchronous measurements beamforming algorithm since the computation time is long when more numbers of measurements are involved. In this paper, two algorithms based on the augmented Lagrange multiplier method and alternating direction method of multipliers are proposed for achieving fast implementation. The proposed algorithms can improve the iteration speed of the non-synchronous measurements beamforming which is proved first in the simulation, and they are further applied in the on-site measurement of the vehicle engine compartment (the data missing cross-spectral matrix of 15 non-synchronous measurements for a given frequency can be completed only in a few seconds). This industrial application has shown the potential of the proposed methods to be further applied for the sound source imaging of large mechanical systems. (C) 2019 Elsevier Ltd. All rights reserved.

Adaptive beamforming for array signal processing in aeroacoustic measurements.

Fast broadband beamforming based on vector hydrophone array

A High-Resolution and Low-Frequency Acoustic Beamforming Based on Bayesian Inference and Non-Synchronous Measurements

Observer-based Beamforming Algorithm for Acoustic Array Signal Processing

Multi-Frequency Transmitting Beamforming Algorithm Based on Cross Array

Cross Power Spectral Density Based Beamforming for Underwater Acoustic Communications

Real-time algorithm for acoustic imaging with a microphone array.

The Applications Of The Observer-Based Beamforming Algorithm For Aeroacoustics

Design of Experimental Adaptive Beamforming System Utilizing Microphone Array

Robust Beamforming and Beamspace DOA Estimation Using Measured Array Manifold of Arbitrary Geometry Acoustic Array

Acoustic beamforming through adaptive diagonal loading

Fast Iteration Algorithms for Implementing the Acoustic Beamforming of Non-Synchronous Measurements

Deconvolution Algorithms of Phased Microphone Arrays for the Mapping of Acoustic Sources in an Airframe Test

Functional Delay and Sum Beamforming for Three-Dimensional Acoustic Source Identification with Solid Spherical Arrays

Improved Algorithm of Three-Dimensional Beamforming Based on Spatial Cross-Array

An Acoustic Beamforming Array Design Method for Spatially Restricted Experimental Facilities

A State Observer Based Algorithm for Aeroacoustic Beamforming

Distributed and Parallel Subarray Beamforming for Underwater Real-Time 3-D Acoustic Imaging

Achieving 3D Beamforming by Non-Synchronous Microphone Array Measurements

Efficient Adaptive Beamforming of Underwater Acoustic Target under Impulsive Noise