Abstract:An IMC with SSVPWM on rectifier side and a BCPWM technique on the inverter side leads to the maximization of the DC‐link voltage, reduction in switching losses and THD of the load voltage. Simulation results confirm the effectiveness of this approach, with real‐time implementation validated using the OPAL‐RT simulator. This article presents a comprehensive investigation into the improved operation of an in‐direct matrix converter (IMC) through the application of improved pulse width modulation (PWM) techniques. Matrix converters (MCs) draw a discontinuous and distorted input current from the AC source, reducing the input power factor and increasing harmonics. The primary objectives of this work are to maximize the DC‐link voltage and improve source current while simultaneously minimizing switching losses and the total harmonic distortion (THD) of the load voltage, thereby improving power quality standards. To achieve these goals, a symmetrical space vector PWM technique (SSVPWM) is employed on the rectifier side, and an improved bus‐clamping PWM technique (BCPWM) is implemented on the inverter side. By strategically controlling the switching patterns, the DC‐link voltage is maximized while adhering to the voltage and current constraints of the switching devices, which improves the input power factor and hence the overall power quality. Additionally, this technique optimizes the operation of the IMC, leads to a reduction of current ripple, and reduces switching losses, thereby leading to higher efficiency. The core principle behind this research lies in the decoupled control of the rectifier and inverter stages, allowing for independent optimization and maximum system performance. By carefully manipulating the modulation indices, the harmonic content in the output voltage is significantly minimized which is vital for applications requiring a high‐quality and low‐distortion power supply. Simulation studies substantiate the efficacy of the independent control approach, showcasing improvements in DC‐link voltage maximization, switching loss reduction, and reduced output voltage THD. Furthermore, the validation of the real‐time implementation of this study was carried out making use of the OPAL‐RT (OP4510) real‐time simulator.

A New Modulation Strategy to Improve the Performance of Bidirectional Isolated AC-DC Matrix Converter

Common-Mode Voltage Reduction with Improved Output Voltage for Three-to-Five-Phase Indirect Matrix Converters

CURRENT CONTROL STRATEGIES FOR MATRIX CONVERTER

A Modified Space Vector Modulation and Phase-Shifted Modulation Coordination Strategy for Isolated AC-DC Matrix Converter

Improved Switching Function Modulation Strategy for Three-Phase to Single-Phase Matrix Converter

Hybrid Modulation Strategy for Two-Stage Matrix Converter and its Application in Vector Control of Doubly Fed Induction Generator.

Improved PWM Modulation Strategy for CHB Multilevel Converter

An Optimized Control Strategy to Improve the Current Zero-Crossing Distortion in Bidirectional AC/DC Converter Based on V2G Concept

Novel Bidirectional High-Frequency Isolated Direct AC/AC Converter with Unipolar Phase-Shifted Modulation Strategy

Improved Full-digital Voltage-commutation Strategy for Matrix Converter

Low THD modulation strategy for matrix & multi-level matrix converter based on modified DVM

Impedance-Balancing-based Modulation Strategy for Common-Mode Noise Elimination of CHB Converter

A Novel Modulation Scheme and a DC-Link Voltage Balancing Control Strategy for T-Type H-Bridge Cascaded Multilevel Converters

Topology and Modulation for a New Indirect Matrix Converter to Reduce the Common-Mode Voltage

Closed-Loop Decoupled Control and Implementation of the Modular Multilevel Matrix Converter in Similar/Equal Frequency Operation

Modified Hybrid Modulation Scheme with Even Switch Thermal Distribution for H-Bridge Hybrid Cascaded Inverters

A New Modulation Method for the Three-Level-Output-Stage Matrix Converter

Topology and Modulation Scheme of a Three-Level Third-Harmonic Injection Indirect Matrix Converter

The Modulation of Common Mode Voltage Suppression for A Three-Level Matrix Converter

Modulation Strategy with Minimum Switching Losses for Three-Phase Non-Isolated AC–DC Matrix Converters

Enhancing Performance of In‐Direct Matrix Converter Through Improved PWM Techniques for Reduced Switching Loss and Optimal DC‐Link Voltage