Abstract:To solve the problems of large switching losses and the need for large-capacity electrolytic capacitances in three-phase DC/AC on-board chargers for vehicle-to-grid (V2G) applications, this paper proposes a single-stage bidirectional high-frequency isolated converter that eliminates the need for large-capacity capacitances. Combined with the proposed modulation scheme, it can theoretically reduce the switching loss by about two-thirds with the three-phase converter compared with the conventional modulation scheme, improving the converter's operating efficiency and power density. Firstly, based on the characteristics of the proposed topology, a hybrid modulation scheme is proposed, which combines a phase-shift modulation scheme based on double modulation waves and a sawtooth carrier with a 1/3 modulation scheme, and the theoretical feasibility of the hybrid modulation scheme is verified using a mathematical modeling equation. Secondly, this paper provides a detailed analysis of the four operating modes of the two full-bridge circuits and the commutation process of the three-phase converter within 1/6 of the fundamental frequency cycle (P1 modulation interval). Then, the control strategy is given for the constant-current and constant-voltage charging and constant-current discharging for electric vehicle batteries. Finally, simulation results verify the correctness of the proposed topology and modulation scheme in vehicle–grid interaction.

An Optimized Control Strategy to Improve the Current Zero-Crossing Distortion in Bidirectional AC/DC Converter Based on V2G Concept

Research on Control Technology and Current Distortion of Bidirectional AC/DC Converter Based on V2G

Current Control for Grid-connected Inverters by Splitting the Capacitor of LCL Filter

An improved control strategy for grid-connected voltage source inverters with a LCL filter

A Zero-Voltage Switching Three-Phase Inverter

A Family of Novel Zero-Voltage Switching Three-Phase PWM Converters Topology for Distributed Generation

Zero Sequence Current Suppression Strategy for Open Winding PMSG Fed by Semi-controlled Converter

Current Zero-Crossing Duration Reduction of a Semicontrolled Open-Winding PMSG System Based on Third Harmonic Current Injection

A Smooth Mode-Switching Strategy for Bidirectional OBC Base on V2G Technology

Control Strategy of Non-Linear Discrete Time-Optimal Error Feedback in PV Grid-Connected Inverter

A Direct Bidirectional Isolated AC-DC Converter for V2G and G2V Application

An Asymmetric Full-bridge Bidirectional DC-AC Converter with Power Decoupling and Common-mode Current Suppression for V2G Application

Zero-Sequence Current Suppression Strategy of Open-Winding PMSG System With Common DC Bus Based on Zero Vector Redistribution

Bidirectional Power Control Strategy for On-Board Charger Based on Single-Stage Three-Phase Converter

Suppression of Zero-Crossing Distortion for Single-Phase Grid-Connected Photovoltaic Inverters with Unipolar Modulation

An Advanced Control Strategy for Bidirectional Isolated Three Phase AC/DC Dual-Active-Bridge Converter in Hybrid Microgrid

A Control Strategy for Achieving Constant Voltage Output with an Extensive ZVS Operating Range in Bidirectional Wireless EV Charging Systems

A Composite Control Strategy for Suppressing the Current Harmonic at the Grid Side of V2G Charger

A Minimum ZVS Current Control Strategy of Semi Bridgeless Active Rectifier for Wide Operation Range Based on LCC-S Compensated WPT System

A modulation strategy for eliminating zero-crossing distortion of dual buck high-precision resonant converter

A Low Distortion Collaborative Modulation for Zero-Crossing Distortion Pseudo DC Link Single-Stage Isolated Inverter