Abstract:Chemical vapour deposition（ CVD） diamond-coated tools have high hardness,excellent wear resistance,good impact toughness,and chemical stability. These tools can meet the requirements of high efficiency and precision machining. Therefore,this technology has been used as commercial coating tools for light-weight,high-strength,and difficult-to-process materials,such as high-silicon aluminium alloys,carbon fiber-reinforced composite materials and graphite.However,CVD diamond-coated tools based on WC-Co cemented carbide are prone to peeling off during the cutting process. Therefore,the development of WC-Co cemented carbide/CVD diamond-coated tools with excellent wear resistance and long-term processing stability is inevitable.Recently,it has been reported that a combination of chemical etching and mechanical treatment can be used to remove the Co binder in the substrate,which enhances the adhesion strength of the diamond coating. Thereby,the bonding performance of WC-Co cemented carbide/CVD diamond-coated tools is improved. However,these techniques lead to the formation of a brittle layer and decreased substrate strength and toughness. A Co-containing compound or deposited intermediate layer,which can successfully block the Co binder,is formed between the WCCo cemented carbide substrate and diamond-coating to prevent a reduction in substrate strength. Moreover,the tribological properties and adhesion strength of diamond-coated tools were also reported to be improved by adjusting the diamond layer’s process parameters and structure and combining microcrystalline and nanocrystalline diamond layers.Firstly,this paper reviews the current applications and existing problems related to WC-Co cemented carbide/CVD diamond-coated cutting tools. Subsequently,the main causes of tool adhesion failure are analysed. Based on the initial review of literature,the latest research progress in the performance improvement of coated tools by various optimisation processes is introduced. Furthermore,this paper presents different grades of WC-Co cemented carbide/CVD diamond-coated tools and the same grades sourced from different manufacturers that were greatly affected by the substrate pretreatment method,such as chemical etching,mechanical etching,the formation of a Co-containing compound or deposited intermediate layer,and the adjustment of the process parameters and structure of the diamond layers. In conclusion,it is proposed that obtaining a universal pretreatment and deposition technology for realising high-efficiency and long-life cutting of WC-Co cemented carbide/CVD diamondcoated tools for different application scenarios may be a future research prospect.

Cohesive Failure and Film Adhesion of PVD Coating: Cemented Carbide Substrate Phase Effect and Its Micro-Mechanism

Effect of Substrates Characteristics on Tribological Behaviors of AlTiN-Based Coated WC–Co Cemented Carbides

Research Progress on Cutting Tools Made from WC?Co Cemented Carbide Substrates and Coated with CVD Diamond

Design for Manufacturing of Cemented Carbide Coated Components Toward High Wear and Impact Resistance Performance

Evaluation of wear mechanisms of PVD and CVD coatings deposited on cemented carbide substrates applied to hard turning

Strategy for achieving high-performance PVD nano-multilayered AlTiN/TiN coated milling tool: Fine platelet-grained WC–Co substrate and interface regulation

Microstructure and wear resistance of bimodal cemented carbide coating prepared by direct laser powder deposition

On the wear mechanisms of uncoated and coated carbide tools in milling titanium alloys

Influence of different wet-blasting pressure on the surface integrity and tool cutting performance of hybrid CVD-TiN/TiCN/α-Al2O3/TiN coated tools

Analysis of Different Complex Multilayer PACVD Coatings on Nanostructured WC-Co Cemented Carbide

Mechanical integrity of PVD TiAlN-coated PcBN: Influence of substrate bias voltage and microstructural assemblage

Microstructural characteristics and wear-resistant mechanisms of WC-TiC-co coatings with varying TiC contents

Effect of Pretreatment Strategy on the Microstructure, Mechanical Properties and Cutting Performance of Diamond Coated Hardmetal Tools Using HFCVD Method

Influence of Cr3C2 and VC Content on WC Grain Size, WC Shape and Mechanical Properties of WC–6.0 wt. % Co Cemented Carbides

Interface characteristics of CVD diamond coating on WC-Co cemented carbide substrate

Study on tribological behavior and cutting performance of CVD diamond and DLC films on Co-cemented tungsten carbide substrates

Comparative Study of Multilayer Hard Coatings Deposited on WC-Co Hardmetals

Microstructure, Tribological and Cutting Performance of Ti-DLC/α-C:H Multilayer Film on Cemented Carbide

Effects of Chemical Surface Pretreatments on Diamond Coatings on Cemented Tungsten Carbide Substrate

Optimizing Wear Resistance and Tensile Strength of Nickel-Based Coatings through Tungsten Carbide Reinforcement

Evaluation of the Adhesion and Failure Mechanism of the Hard CrN Coatings on Different Substrates