Abstract:Ultrasonic impact treatment of stainless steel AISI 321 was carried out at room temperature (in the argon environment – argon-UIT) and at cryogenic temperature (in liquid nitrogen – cryo-UIT) in the constrained conditions with application of the same mechanical energy to the treated specimens. The time dependencies of the surface hardness HV after the cryo-UIT and argon-UIT processes were of sigmoidal and parabolic shapes, respectively. The microstructural evolution of the surface layers of the deformed specimens was studied by X-ray diffraction (XRD), optical microscopy (OM), transmission electron microscopy (TEM) and selective area electron diffraction (SAED) analyses. The volume fractions of the deformation-induced α′ (V α′) and ε (V ε) martensites were estimated using XRD approach and by magnetic and density measurements. Compared to the room temperature UIT in the argon environment (argon-UIT), the liquid nitrogen UIT generates a higher density of the deformation twins and stacking faults. In addition, a higher V α′ (~53%) and V ε (~3.5%) were observed after cryo-UIT in deeper surface layers (~200μm). The argon-UIT process leads to the formation of either rectangular twin blocks or dislocation cells, which size ranged 200–500nm. Conversely, after cryo-UIT (ē ≈0.95), a nanoscale grain structure of heterogeneous nature (α′ and γ phases) was formed in the outmost surface layer simultaneously with the areas filled with networks of deformation twins and stacking faults. The minimum grain size of α′-martensite D α′ and austenite D γ was respectively 25 and 45nm, and twin thickness/spacing was of 60–120nm. Both types of the microstructure contribute to the material strength and result in higher hardness of the cryo-UIT processed specimens (~5–5.66GPa) compared to that of the argon-UIT processed ones (~4.3GPa). With the increase in Zener-Hollomon parameter lnZ, the grain/twin/spacing size is decreased while the V α′ and surface microhardness HV are increased.

Cryogenic Work-Hardening Behavior for a Metastable Austenitic Stainless Steel at Liquid Nitrogen Temperature

Deformation microstructures and martensitic transformation pathways in cryogenically deformed 316L stainless steel

Breaking the Strength-Ductility trade-off in Austenitic Stainless Steel at Cryogenic Temperatures: Mechanistic Insights

Case Study of the Tensile Fracture Investigation of Additive Manufactured Austenitic Stainless Steels Treated at Cryogenic Conditions

Extraordinary strength and ductility of cold-rolled 304L stainless steel at cryogenic temperature

Mechanical performance and deformation mechanisms at cryogenic temperatures of 316L stainless steel processed by laser powder bed fusion: In situ neutron diffraction

Influence of microstructural features and deformation-induced martensite on hardening of stainless steel by cryogenic ultrasonic impact treatment

Cooperative Enhancements in Ductility and Strain Hardening of a Solution-Treated Al–Cu–Mn Alloy at Cryogenic Temperatures

Effect of Cryogenic Temperatures on the Mechanical Behavior and Deformation Mechanism of AISI 316H Stainless Steel

Cryogenic Toughness in a Low-Cost Austenitic Steel

Low-Cycled Fatigue Life of S30408 Stainless Steel at Liquid-Nitrogen Temperature

Microstructure and mechanical properties of austenitic stainless steel welded with Co-based wires in cryogenic temperature environment

Cryorolling impacts on microstructure and mechanical properties of AISI 316 LN austenitic stainless steel

Low temperature macro- and micro-mechanical behavior of an ultrafine-grained metastable 304 austenitic stainless steel investigated by in situ high-energy X-ray diffraction

Temperature Dependence of Deformation Behaviors in High Manganese Austenitic Steel for Cryogenic Applications

Low temperature mechanical behavior of fine- and ultrafine-grained 304 austenitic stainless steel fabricated by cryogenic-rolling and annealing

Tailoring the Microstructure to Enhance the Cryogenic Mechanical Properties of a Fe–34.5mn–0.04c Steel

Microstructure evolution of austenitic stainless steels under high-cycle-fatigue loading at deep cryogenic temperature

Simultaneous Enhancement of Strength and Ductility in a Finegrained Fe-30Mn-0.11C Steel at 77 K

Microscopic Insights of the Extraordinary Work-Hardening Due to Phase Transformation

Martensitic transformation in rolled 301 stainless steel induced by cryogenic treatment