Abstract:In laser-induced breakdown spectroscopy (LIBS), a focused laser pulse is used to ablate material from a surface and form a laser plasma that excites the vaporized material. Geometric factors, such as the distance between the sample and the focusing lens and the method of collecting the plasma light, can greatly influence the analytical results. To obtain the best quantitative results, one must consider this geometry. Here we report the results of an investigation of the effect of sampling geometry on LIBS measurements. Diagnostics include time-resolved spectroscopy and temporally and spectrally resolved imaging using an acousto-optic tunable filter (AOTF). Parameters investigated include the type of lens (cylindrical or spherical) used to focus the laser pulse onto the sample, the focal length of the lens (75 or 150 mm), the lens-to-sample distance (LTSD), the angle-of-incidence of the laser pulse onto the sample, and the method used to collect the plasma light (lens or fiber-optic bundle). From these studies, it was found that atomic emission intensities, plasma temperature, and mass of ablated material depend strongly on the LTSD for both types of lenses. For laser pulse energies above the breakdown threshold for air, these quantities exhibit symmetric behavior about an LTSD approximately equal to the back focal length for cylindrical lenses and asymmetric behavior for spherical lenses. For pulse energies below the air breakdown threshold, results obtained for both lenses display symmetric behavior. Detection limits and measurement precision for the elements Be, Cr, Cu, Mn, Pb, and Sr, determined with the use of 14 certified reference soils and stream sediments, were found to be independent of the lens used. Time-resolved images of the laser plasma show that at times >5 μs after plasma formation a cloud of emitting atoms extends significantly beyond the centrally located, visibly white, intense plasma core present at early times (<0.3 μs). It was determined that, by collecting light from the edges of the emitting cloud, one can record spectra using an ungated detector (no time resolution) that resemble closely the spectra obtained from a gated detector providing time-resolved detection. This result has implications in the development of less expensive LIBS detection systems.

Studies on target-induced enhancement in pre-ablation orthogonal double-pulse laser-induced breakdown spectroscopy

Detection of gold alloy elements by target-enhanced orthogonal triple-pulse laser-induced breakdown spectroscopy with improved sensitivity and minimal sample ablation

Theoretical study on signal enhancement mechanism of coaxial DP-LIBS

Nanosecond laser preheating effect on ablation morphology and plasma emission in collinear dual-pulse laser-induced breakdown spectroscopy

Performance investigation of pre-ablation and reheating orthogonal double-pulse nanoparticle enhanced laser-induced breakdown spectroscopy

Enhancement and Stabilization of Plasma Using Collinear Long-Short Double-Pulse Laser-Induced Breakdown Spectroscopy

Double-pulse neodymium YAG/Carbon dioxide laser-induced breakdown spectroscopy for excitation of bulk and trace analytes

Emission Characteristics of Laser-Induced Plasma Using Collinear Long and Short Dual-Pulse Laser-Induced Breakdown Spectroscopy (LIBS)

Effect of Laser Pulse Energy on Orthogonal Double Femtosecond Pulse Laser-Induced Breakdown Spectroscopy

Novel Signal Enhancement Strategy for Laser-Induced Breakdown Spectroscopy via Miniaturized Atmospheric Pressure Glow Discharge

Flame-assisted plasma modulation to improve the raw signal quality for laser-induced breakdown spectroscopy

Effect of Sampling Geometry on Elemental Emissions in Laser-Induced Breakdown Spectroscopy

The signal quality improvement of laser-induced breakdown spectroscopy due to the microwave plasma torch modulation

Improving signal stability and analysis accuracy in laser-induced breakdown spectroscopy by multi-directional collection

Laser induced breakdown spectroscopy based on single beam splitting and geometric configuration for effective signal enhancement

Experimental Determination of the Temperature Range of Alo Molecular Emission in Laser-Induced Aluminum Plasma in Air

Elemental Analysis Technique Based on Laser Induced Breakdown Spectroscopy

A review: experimental and applied research of double-pulse laser-induced breakdown spectroscopy

Enhancing Electromagnetic Radiations by a Pre-Ablation Laser During Laser Interaction with Solid Target

On the Improvement of Signal Repeatability in Laser-Induced Air Plasmas

Enhancement of Laser-Induced Breakdown Spectroscopy (LIBS) Detection Limit Using a Low-Pressure and Short-Pulse Laser-Induced Plasma Process