Abstract:Background Comprehensive quality assurance (QA) for a seamless workflow of high‐dose‐rate brachytherapy, from imaging to planning and irradiation, is uncommon, and QA of the source dwell position is performed in one‐ or two‐dimensions. Gel dosimetry using magnetic resonance imaging (MRI) is effective in verifying the three‐dimensional distribution of doses for image‐guided brachytherapy (IGBT). However, MRI scanners are not readily accessible, and MRI scanning is time‐consuming. Nevertheless, X‐ray computed tomography (XCT) is available for IGBT planning. Purpose In this study, we designed and developed an efficient method for QA for a seamless workflow of IGBT with a new commercially available XCT‐based polymer gel dosimeter. Methods To enable direct insertion of brachytherapy applicators, the gelatinizing agent of the dosimeter was modified. A cylindrical polyvinyl chloride jar was filled with the modified gel dosimeter, which was subsequently used to determine the reproducibility of source dwell positions, detectability of source positional errors from intentionally introduced catheter length offsets, effect of looped source transfer tubes on the average displacement, extent of inter‐observer variation, and gel robustness following multiple needle‐insertions. Three ProGuide sharp needles were inserted into the jar. The dwell time at each point was determined to identify the irradiated volume with a diameter of approximately 10 mm on XCT images. All the times were the same. The plan was delivered using an afterloader with an Ir‐192 radioactive source, and the irradiated gel dosimeter was scanned using an XCT scanner. The subtracted images were generated from pre‐ and post‐irradiated images. Volumes with incremented Hounsfield units were manually identified and contoured. The centroid of the volume was defined as the measured source dwell position. Subsequently, planned source dwell positions were extracted from the DICOM file of the plan. Finally, the source dwell positions in plan and irradiated gel were compared in three axes. Results The hardness of the dosimeter was 1250% greater than that of the previously reported gel dosimeter. Source dwell positions were visually identified in the XCT image. Testing of CT acquisition, planning, irradiation, and analysis was completed in approximately 1 h. In the reproducibility test of source dwell positions, created by inserting three needles (each with three source dwell positions), the average displacements of the source positions from the first source dwell position were within 0.5 mm in all three directions. In the detectability test, displacements were less than 1 mm in the x–y plane but greater than 1 mm in the z‐axis, which was the source path direction. When errors of 1–3 mm were intentionally introduced, the measured displacement was within 0.7 mm of the median (range: 0.21–1.65 mm) of intentional errors. When the transfer tube was looped, the source dwell position displaced by approximately 1 mm. After 20 needle‐insertions, the source dwell position displacement was within 1 mm. The maximum inter‐observer variation of contouring was 0.57 mm. Conclusions The XCT‐based gel dosimeter enabled verification of three‐dimensional source dwell positions for a seamless workflow of IGBT with high precision and efficiency.

3D Proton Bragg Peak Visualization and Spot Shape Measurement with Polymer Gel Dosimeters

Dose perturbations in proton pencil beam delivery investigated by dynamically deforming silicone-based radiochromic dosimeters

End-to-End QA with Polymer Gel Dosimeter for Photon Beam Radiation Therapy

Prompt Gamma Imaging with a Multi-Knife-edge Slit Collimator for Large FOV Monitoring of Scanned Proton Pencil Beams

Simulation Study of a 3-D Multislit Prompt Gamma Imaging System for Proton Therapy Monitoring

3D Prompt Gamma Imaging in a Dual-head Multi-slit System for Proton Beam Range Monitoring

Direct Response to Proton Beam Linear Energy Transfer (let) in A Novel Polymer Gel Dosimeter Formulation

Development of 3D Dosimetry System Using Polymer Gel (TENOMAG) and Optical-CT Scanner in Prostate IMRT

Spot Decomposition in a Novel Pencil Beam Scanning Proton Computed Tomography

3D Polymer Gel Dosimeters with iCBCT 3D Reading and polyGeVero-CT Software Package for Quality Assurance in Radiotherapy

3D prompt gamma imaging for proton beam range verification

Scanned Proton Pencil Beam'S Lateral Profile Library To Describe The Spot Dose Characteristics

Development and Performance Evaluation of a Prompt Gamma Imaging System for Real-time Proton Therapy Monitoring

Three‐dimensional source position verification in image‐guided high‐dose‐rate brachytherapy using an XCT‐based gel dosimeter

Novel Bragg peak characterization method using proton flux measurements on plastic scintillators

First application of a high-resolution silicon detector for proton beam Bragg peak detection in a 0.95 T magnetic field

Toward real-time, volumetric dosimetry for FLASH-capable clinical synchrocyclotrons using protoacoustic imaging

A Single Detector Energy-Resolved Proton Radiography System: a Proof of Principle Study by Monte Carlo Simulations

Comprehensive dosimetric commissioning of proton minibeam radiotherapy on a single gantry proton system

Beyond Gaussians: a study of single-spot modeling for scanning proton dose calculation.

Deep Learning Based 3D Dose Estimation from Prompt Gamma Distribution for Proton Therapy Monitoring