Abstract:The in-situ strengthening approach has attracted increasing attention in the selective laser melting (SLM) of high-performance alloy. In the present work, the argon-nitrogen (Ar-N2) reactive atmosphere was introduced in the SLM of Ti6Al4V alloy to achieve in-situ strengthening. The microstructure evolution and mechanical performance were studied under various atmosphere conditions and laser processing parameters, respectively. The results show that the solid-solution of 871 ppm ~ 1460 ppm nitrogen was obtained in the titanium matrix through the SLM in the Ar-N2 atmosphere, whereas no trace of nitride was found. Compared with the pure Ar atmosphere condition, an increasing ratio of nano-scale β phase and coarser martensites could be found after the addition of 5 vol.% N2 in the Ar atmosphere, and the twinning phenomenon becomes more conspicuous as well. Under the Ar-N2 reactive atmosphere, the as-built Ti6Al4V alloy exhibits a significantly high yield strength of 1336 MPa and ultimate tensile strength of 1418 MPa, which are notably higher than previously reported SLM and conventionally manufactured Ti6Al4V alloys. Meanwhile, the fracture elongation of ~6% was obtained while attaining the high tensile strength. Analysis exhibits that the solid solution of the nitrogen atom is the main reason for improving strength in the nitrogen-strengthened Ti6Al4V samples. The strength of Ti6Al4V alloy was improved without excessive sacrifice of ductility, which was attributed to the multiple effects of the nitrogen solid-solution and the intrinsic heat treatment. This work adopts a practical methodology with designed low nitrogen content in the SLM process to achieve an in-situ strengthening of Ti6Al4V alloy without the formation of brittle nitrides.

Additive Manufacturing of the High-Strength and Low Modulus Biomedical Ti-10 Nb Alloy under Reactive Atmosphere

Additive manufacturing of titanium alloys with enhanced strength and uniform ductility via multi-element alloying

Additively Manufactured Biomedical Ti-Nb-Ta-Zr Lattices with Tunable Young's Modulus: Mechanical Property, Biocompatibility, and Proteomics Analysis.

Microstructure and Corrosion Resistance of Powder Metallurgical Ti-Nb-Zr-Mg Alloys with Low Modulus for Biomedical Application

In Situ Fabrication of a Titanium-Niobium Alloy with Tailored Microstructures, Enhanced Mechanical Properties and Biocompatibility by Using Selective Laser Melting

Development of Bio-Compatible Beta Ti Alloy Powders for Additive Manufacturing for Application in Patient-Specific Orthopedic Implants

Excellent Synergies of Mechanical Properties and Biological Performance of Additively-Manufactured Ti Cu Alloy

Additive Manufacturing of In-Situ Reinforced Ti–35Nb–5Ta–7Zr (TNTZ) Alloy by Selective Electron Beam Melting (SEBM)

In vitro evaluation of the biocompatibility and bioactivity of a SLM-fabricated NiTi alloy with superior tensile property

Microstructure and Mechanical Behavior of Metal Injection Molded Ti–Nb Binary Alloys As Biomedical Material

Developing novel Ti-Nb-Zr-Mo-Sn-O biomedical titanium alloys with high strength and low modulus through high-throughput experiments

Biomedical Ti–Nb–O alloy with high strength and ultra-low Young's modulus

In situ production of low-modulus Ti–Nb alloys by selective laser melting and their functional assessment toward orthopedic applications

Controlling the microstructure and mechanical properties of a metastable β titanium alloy by selective laser melting

Microstructure and Mechanical Property Improvement of Laser Additive Manufacturing Ti–6Al–4V via the Niobium Addition

Achieving Ultra-High Superelasticity And Cyclic Stability Of Biomedical Ti-11nb-40 (At.%) Alloys By Controlling Nb And Oxygen Content

Anisotropic Mechanical and Microstructural Properties of a Ti-6Al-7Nb Alloy for Biomedical Applications Manufactured via Laser Powder Bed Fusion

Additive Manufacturing of Pure Ti with Superior Mechanical Performance, Low Cost, and Biocompatibility for Potential Replacement of Ti-6Al-4V

Mechanical and biological properties of Ti–(0–25 wt%)Nb alloys for biomedical implants application

Enhancing Strength and Ductility in High Nb-containing TiAl Alloy Additively Manufactured Via Directed Energy Deposition

In-situ nitrogen strengthening of selective laser melted Ti6Al4V with superior mechanical performance