Abstract:This article presents an 18 similar to 30 GHz vector-sum phase shifter for wireless application in the millimeter-wave regime. It is composed of an I/Q signal generator, two variable-gain amplifiers (VGA), and a digital-to-analog converter with a quadrant selector. To attain wideband quadrature signal, a two-stage hybrid based on transformers is proposed to realize the I/Q signal generator. The first- and second-stage hybrids are designed with different resonating frequencies. As a result, the amplitude and phase errors of the I/Q signal generator are significantly decreased in a wide frequency band. In addition, theoretical analysis based on a simplified equivalent-circuit model is performed to guide the circuit implementation, and its correctness is demonstrated by electromagnetic simulation. To mitigate the impact of the VGAs' parasitics on the phase performance, a capacitive-neutralization technique is applied to cancel parasitics of transistors in the VGAs. A prototype circuit is designed using a 130-nm SiGe BiCMOS process. The measured results show that the circuit achieves a root-mean-square (RMS) amplitude error of less than 1.4 dB and an RMS phase error of 1.4 degrees similar to 3.4 degrees across 18 similar to 32 GHz. The tested peak gains of all the phase states are -1 similar to 4.5 dB with an input balun (approximate to 1.9 dB loss) and an output balun (approximate to 2 dB loss) at 22 GHz. Also, the input 1-dB compression point and noise figure are tested, which are >=-1 dBm and <= 15.5 dB in the targeting frequency band.

A Dual-Band Vector-Sum Phase Shifter for 28-Ghz and 60-Ghz Phased Arrays in 65-Nm CMOS.

An 18~30 GHz Vector-Sum Phase Shifter with Two-Stage Transformer-Based Hybrid in 130-Nm SiGe BiCMOS

An 18 similar to 30 GHz Vector-Sum Phase Shifter With Two-Stage Transformer-Based Hybrid in 130-nm SiGe BiCMOS

An Ultra Broadband Passive Vector Modulator Phase Shifter

An E-band Subradix Active Phase Shifter with < 0.69° RMS Phase Error and 16-Db Attenuation in 28-Nm CMOS

29-/35 GHz Dual-band High-Gain Phase Shifter with Hybrid -Networks

A Ka-band 8-Element 4-Beam Transmitter Front End with Hybrid VGA and Symmetrical Transformer-based Doherty PA

A 32-40 GHz 7-bit Bi-Directional Phase Shifter With 0.36 dB/1.6 RMS Magnitude/Phase Errors for Phased Array Systems

A 32-40 GHz 7-Bit CMOS Phase Shifter with 0.38db/1.6° RMS Magnitude/Phase Errors for Phased Array Systems

A C-Band Compact High-Linearity Multibeam Phased-Array Receiver With Merged Gain-Programmable Phase Shifter Technique

On-chip vector modulation phase shifter

A 26-32Ghz 6-Bit Bidirectional Passive Phase Shifter with 14dbm IP1dB and 2.6° RMS Phase Error for Phased Array System in 40nm CMOS

A 9-Bit Vector-Sum Digital Phase Shifter Using High Resolution VGAs and Compensated Quadrature Signal Generator

A 21 to 30-Ghz Merged Digital-Controlled High Resolution Phase Shifter-Programmable Gain Amplifier with Orthogonal Phase and Gain Control for 5-G Phase Array Application

A Compact 90–96 GHz 6‐bit Passive Vector Modulator Phase Shifter in 28‐nm CMOS for Phase Array Applications

A Ku-Band 6-Bit Vector-Sum Phase Shifter with Half-Quadrant Control Technique

A 28ghz Rf Phase Shifter With High Phase Resolution In 180-Nm Cmos Technology

Design and Analysis of a 26–32-Ghz 6-Bit Passive Vector Modulation Phase Shifter for CMOS Bidirectional Transceiver

A 60-Ghz Vector Summing Phase Shifter With Digital Tunable Current-Splitting And Current-Reuse Techniques In 90 Nm Cmos

A 4-Bit CMOS Phase Shifter for Millimeter-Wave Phased Arrays

A 8-12 GHz Vector-Sum Phase Shifter Using a Marchand Balun and Gilbert-Cell Structure