Abstract:Proton exchange membrane fuel cells (PEMFCs) have penetrated many commercial markets, especially in the automotive market as Toyota has launched the first commercially mass‐produced fuel cell vehicle, the Mirai in 2014. Electrocatalysts play an irreplaceable role in determining the PEMFCs, performance and account for half of the total cost. Despite substantial progress in exploiting highly active platinum group metal (PGM) and PGM‐free electrocatalysts, current electrocatalysts are faced with significant durability challenges, i.e., high‐performance electrocatalysts usually suffer from rapid degradation during PEMFC operation. The lifetime of the reported electrocatalysts is far from the requirement of performing steadily over the 8000 h of operation in commercialized PEMFCs. To this end, addressing the durability issues of oxygen reduction reaction (ORR) electrocatalysts is imperative for their practical employment in PEMFCs. Herein, the state‐of‐the‐art advances in understanding the durability issues of PGM and PGM‐free catalysts for ORR under fuel cell conditions and the materials engineering strategies to tackle these issues are summarized. The insights into the durability issues, involving the degradation mechanisms and the impact of operation conditions are reviewed. Establishing strategies to mitigate catalyst degradation through rational design of stable PGM and PGM‐free catalysts is highlighted. Materials engineering strategies to improve the stability of platinum group metal (PGM) and PGM‐free catalysts are comprehensively reviewed. The state‐of‐art understanding of degradation mechanisms and the influence of operation conditions are discussed. Establishing strategies to mitigate catalyst degradation through rational design of stable catalysts is highlighted in order to offer some possible solutions to this long‐standing issue.

Durable High‐Temperature Proton Exchange Membrane Fuel Cells Enabled by the Working‐Temperature‐Matching Palladium‐Hydrogen Buffer Layer

Experimental Study on the Effect of Flow Channel Parameters on the Durability of PEMFC Stack and Analysis of Hydrogen Crossover Mechanism

Proton exchange membrane fuel cell degradation under close to open-circuit conditions

Overcoming the Electrode Challenges of High-Temperature Proton Exchange Membrane Fuel Cells

Degradation Differences of a Single Proton Exchange Membrane Fuel Cell: Energy Management Strategy and Dynamic Programming

FeP Modulated Adsorption with Hydrogen and Phosphate Species for Hydrogen Oxidation in High‐Temperature Polymer Electrolyte Membrane Fuel Cells

Materials Engineering toward Durable Electrocatalysts for Proton Exchange Membrane Fuel Cells

Rational Materials and Structure Design for Improving the Performance and Durability of High Temperature Proton Exchange Membranes (HT‐PEMs)

Catalytic Approaches Towards Highly Durable Proton Exchange Membrane Fuel Cells with Minimized Pt Use

Fluorination-enabled Interface of PtNi Electrocatalysts for High-Performance High-Temperature Proton Exchange Membrane Fuel Cells

H Induced Metal‐Insulation Transition Boosts the Stability of High Temperature Polymer Electrolyte Membrane Fuel Cells

Durability degradation mechanism and consistency analysis for proton exchange membrane fuel cell stack

High ion exchange capacity perfluorosulfonic acid resine proton exchange membrane for high temperature applications in polymer electrolyte fuel cells

Progress in High Temperature Proton Exchange Membranes for Fuel Cell

Improved Performance of High‐Temperature Proton Exchange Membrane Fuel Cells by Purified CNT Nanoporous Sheets

Phosphoric Acid Based Proton Exchange Membranes for High Temperature Proton Exchange Membrane Fuel Cells

Multi-functional Anodes Boost the Transient Power and Durability of Proton Exchange Membrane Fuel Cells

Pt Nanoparticles on Atomic-Metal-Rich Carbon for Heavy-Duty Fuel Cell Catalysts: Durability Enhancement and Degradation Behavior in Membrane Electrode Assemblies

Highly durable direct methanol fuel cell with double-layered catalyst cathode

Progress of Phosphoric Acid Doped High Temperature Proton Exchange Membrane for Fuel Cells

Optimization on Composition and Structure of Catalyst Layer for High-Temperature Polymer Electrolyte Membrane Fuel Cells