Abstract:Both glycidyl azide polymer (GAP) and hexanitrohexaazaisowurtzitane (CL-20) are high-energy compounds with very promising applications. However, there are relatively few relevant studies for GAP/CL-20 aluminum-based propellants. In this paper, the CCPs of aluminum-based GAP/CL-20 propellant under different operating conditions were collected by a gas collecting device, and the physicochemical properties of CCPs were carefully studied by various modern analytical and testing instruments. The results show that the CCPs consist mainly of smoke oxide particles (similar to 1 mu m), residual oxide particles (similar to 20 mu m) and agglomerates. Residual oxide particles are widely available, but have received less attention from researchers. The agglomerates can be divided into two categories: sphere-like agglomerates and non-spherical agglomerates. Sphere-like agglomerates include cracked spheres, solid spheres, hollow spheres, and spheres with oxide caps. Surprisingly, we found an agglomerate with two caps. Non-spherical agglomerates are larger in size than sphere-like agglomerates, and the non-spherical agglomerates include irregular agglomerates, coral-like aggregates, and filamentous agglomerates. As far as we know, coral-like aggregates and filamentous agglomerates in CCPs have not been reported in the literature. Pocket theory and inter-pocket bridge theory were used to explain the formation mechanism of fine filament agglomerates. In addition, the formation mechanisms of different types of agglomerates were analyzed and sorted out. The particle size distribution of CCPs at different pressures shows that the average particle size of CCPs decreases with increasing pressure. It is hoped that this paper can provide a reference for the design of high-energy propellant formulations.

Rheological Impact of Particle Size Gradation on GAP Propellant Slurries

The Influence of Particles' Aspect Ratio on the Shear Behaviour of Granular Materials

Graft Copolymerization of Styrene and Acrylonitrile in the Presence of Poly(Propylene Glycol): Particle Growth

Rheological Properties and Curing Kinetics of GAP-based Propellant Slurries

Study on Dynamic Impact and Ignition Response Behavior of GAP/PET/RDX Based Propellant

The kinetic and viscosity analysis of glycidyl azide polymer spherical propellant

Using Rheometry to Study the Curing Kinetics of Glycidyl Azide Polymer Spherical Propellant by Non-Isothermal Method

Influence of Solid Filler on the Rheological Properties of Propellants Based on Energetic Thermoplastic Elastomer

Effect of Components on the Curing of Glycidyl Azide Polymer Spherical Propellant Through Rheological Method

Study on the Ignition Combustion and Agglomeration Mechanism of GAP/CL-20 Composite Propellants

Thermal structural damage and thermal decomposition characterization of GAP propellants with nitrate ester plasticizers

Morphology and Size Distribution of Condensed Combustion Products of Aluminum-Based Propellants

Molecular Dynamics Study of the Structures and Properties of RDX/GAP Propellant.

Influence of Nano-/Micro- Powder Filler on Properties of Propellant Slurry

Mechanical Properties and Thermal Decomposition Mechanism of Glycidyl Azide Polyol Energetic Thermoplastic Elastomer Binder with RDX Composite

A Novel Method of Improving the Mechanical Properties of Propellant Using Energetic Thermoplastic Elastomers with Bonding Groups

Effect of particle gradation on the properties of Mg(OH)2 slurry: viscosity, stability, and rheology

Preparation of PDA@AP composite particles by two‐step method and its application in glycidyl azide polymer‐energetic thermoplastic elastomer propellants

Fluoropolymer/Glycidyl Azide Polymer (GAP) Block Copolyurethane as New Energetic Binders: Synthesis, Mechanical Properties, and Thermal Performance

Research on the Thermal Aging Performance of a GAP-Based Polyurethane Elastomer

The Effect Of Processing Parameters On The Rheological Property Of Foam Slurry Of Gangue