Abstract:To predict brittle fracture in high-strength steels, this study introduces a methodology for analyzing hydrogen-assisted degradation. The proposed approach considers the fully coupled problems of deformation-hydrogen diffusion and cohesive zone modeling. The analysis of hydrogen diffusion assumes that trapped and lattice hydrogen remain in a equilibrium state while accounting for the relationships between the increase in trap sites and plastic strain. The diffusion model simulates hydrogen diffusion in the small scale yielding (SSY) configuration at a crack tip. The simulation results reveal that hydrogen diffusion follows the hydrostatic stress distribution around the crack tip region. Additionally, the plastic strain near this area leads to an increased number of trap sites. Notably, the simulations indicate that lattice hydrogen is the dominant source of embrittlement when a sufficient amount of hydrogen atoms dissolve into the steel, as compared to trapped hydrogen. The hydrogen-assisted degradation evolution is studied by investigating the influence of hydrogen in a cohesive zone modeling (CZM) with a trapezoidal traction separation law (TSL), based on Hydrogen-Enhanced DEcohesion (HEDE) framework. The fully computational framework is utilized to simulate the hydrogen-charged fracture toughness test in a (CT) specimen made of 30CrMo high strength steel. It is demonstrated that the load bearing capacity of the specimen decreases with an increase in the initial hydrogen concentration. Furthermore, the study examines the evolution of the initial crack time with varying initial hydrogen concentrations. The initial hydrogen concentrations are estimated to match the maximum loads observed in the experimental load-displacement curves based on computational framework. The computational CTOD-R curves for hydrogen generally follow the experimental data, the marginally elevated computational CTOD values to underestimate the embrittling in hydrogen-contaminated steel. Overall, the present study proves the capability of this numerical technique to reproduce experimental findings related to hydrogen-assisted fracture.

A Physically Based Model Predicting the Degradation of Hydrogen on Crack Growth Critical Stress Intensity Factor of Metals

Numerical Simulation on Hydrogen Induced Cracking Behavior of 4130X Hydrogen Storage Vessel with Defect

Analysis of Hydrogen-Assisted Brittle Fracture Using Phase-Field Damage Modelling Considering Hydrogen Enhanced Decohesion Mechanism

Mechanistic model for hydrogen accelerated fatigue crack growth in a low carbon steel

Computational predictions of hydrogen-assisted fatigue crack growth

A predictive model unifying hydrogen enhanced plasticity and decohesion

A Modified Model of Residual Strength Prediction for Metal Plates with Through-Thickness Cracks

Numerical analysis of the fully-coupled continuum cohesive modeling on the hydrogen-assisted degradation behavior in high-strength steel

A Corrosion Cracking Mechanism-Based Model with Molten Salt Corrosion Damage Coupling the Effect of Chloride Impurity and Plastic Deformation

A Phase-Field Regularized Cohesion Model for Hydrogen-Assisted Cracking

A New Model For Predicting Crack Initiation Life In Thin Walled Tubes Under Multiaxial Proportional Loading

Fracture Strain Model for Hydrogen Embrittlement Based on Hydrogen Enhanced Localized Plasticity Mechanism

Hydrogen diffusion behavior within microstructures near crack tip: A crystal plasticity study

Hydrogen Enhanced Intergranular Cracking -- A Phenomenological Multiscale Constitutive Model

A Coupled Diffusional-Mechanical Model Accounting for Hydrogen Enhancements of Strain-Induced Dislocations and Vacancies

Modelling Hydrogen Induced Stress Corrosion Cracking in Austenitic Stainless Steel

Special Fatigue Fracture Behavior of Nanocrystalline Metals under Hydrogen Conditions

Hydrogen induced delayed plasticity and cracking

Fatigue Crack Growth Modelling for Pipeline Carbon Steels under Gaseous Hydrogen Conditions

Strain gradient plasticity-based modeling of hydrogen environment assisted cracking