Abstract:Innovations for terrestrial transportation technologies, e.g., cars, aircraft, and so on, have driven historical industries so far, and a similar breakthrough is now occurring in space owing to the successful development of electric propulsion devices such as gridded ion and Hall effect thrusters, where solar power is converted into the momentum of the propellant via acceleration of the ionized gases, resulting in a high specific impulse. A magnetic nozzle (MN) radiofrequency (rf) plasma thruster consisting of a low-pressure rf plasma source and a MN is an attractive candidate for a high-power electric propulsion device for spacecraft, as it will provide a long lifetime operation at a high-power level due to the absence of an electrode exposed to the plasma and a high thrust density. The high-density plasma produced in the source is transported along the magnetic field lines toward the open-source exit and the plasma is then spontaneously accelerated in the MN. By ejecting the plasma flow from the system, the reaction forces are exerted to the thruster structure including the source and the MN, and the spacecraft is resultantly propelled. The thruster will open the next door for space technologies, while the performance of the MN rf plasma thruster has been lower than those of the mature electric propulsion devices due to the energy loss to the physical walls. Here the thruster efficiency of about 30%, being the highest to date in this type of thruster, is successfully obtained in the MN rf plasma thruster by locating a cusp magnetic field inside the source, which acts as a virtual magnetic wall isolating the plasma from the source wall. The increase in the thrust by the cusp can be explained by considering the reductions of the loss area and the plasma volume in a thrust analysis combining a global source model and a one-dimensional MN model.

A New Concept of Using Chemical Energy to Improve the Efficiency of the ECR Magnetic Nozzle Thruster

Design of Compact Hexapole ECR Ion Thruster

Plasma plume enhancement of a dual-anode vacuum arc thruster with magnetic nozzle

The performance of a magnetic nozzle enhanced magnetoplasmadynamic thruster

Electron Cyclotron Resonance Discharge Enhancement in a Cusped Field Thruster

Thirty percent conversion efficiency from radiofrequency power to thrust energy in a magnetic nozzle plasma thruster

Compact Permanent Magnet Hexapole ECR Ion Thruster

Magnetic Confinement Less Microwave Discharge Gridded Ion Thruster

Design of Magnetically Enhanced Hollow Cathode Micro-Thruster: Concept and Experimental Research

Integrated study on the comprehensive magnetic-field configuration performance in the 150 kW superconducting magnetoplasmadynamic thruster

Experimental investigation of the electromagnetic acceleration mechanisms in an Applied-field Magnetoplasmadynamic Thruster

Optimization of a coaxial electron cyclotron resonance plasma thruster with an analytical model

Optimizing a Hall Thruster with Aft-Loaded Magnetic Field by Aft-Loading Design of Gas Flow

Effects of Magnetic Conduction Sleeve on the Performance of a Multi-Cusped Field Thruster

Novel excitation structure to improve the performance of a miniature radio frequency ion thruster

Study on the Ionization and Acceleration of a Microwave Discharge Cusped Field Thruster

Design and Fabrication of a Novel Microthruster Based on Electrochemical Principle

A Homogeneously Catalyzed Micro-Chemical Thruster

Enhancement of the electrostatic–magnetic hybrid thrust performance using a stagnant ring

A new configuration for high power propulsion plasmas driven by ion cyclotron resonance energization

Thrust Enhancement of a Microwave Ion Thruster