Catalytic Cascade Upcycling Single-Use Natural Rubber Glove Wastes into Fuels Via a Two-Stage Pressurized Fixed-Bed Reactor

Jia Wang,Jianchun Jiang,Xianzhi Meng,Su Shiung Lam,Arthur J. Ragauskas,Yanqin Wang

DOI: https://doi.org/10.1016/j.fuproc.2022.107490

IF: 8.129

2022-01-01

Fuel Processing Technology

Abstract:Chemical upcycling rubber wastes into hydrocarbon fuels offers a promising approach toward achieving carbon neutrality. To generate fuel-range cycloalkanes and isoalkanes from natural rubber glove wastes (NRGWs), the depolymerization of NRGWs was performed by integrating hydropyrolysis with vapor-phase hydrogenation over a bifunctional Ni/Al2O3-SiO2 catalyst. Isoprene and limonene were the primary alkenes obtained from the non -catalytic hydropyrolysis of NRGWs, and these intermediates were vapor-phase hydrotreated over Ni/Al2O3-SiO2 producing C10 cycloalkane as the dominant fuel-range products. Complete hydrogenation of isoprene and limonene was achieved under a catalyst to feedstock mass ratio of 2.0, giving a maximum gasoline yield of 92 wt % under 225 degrees C hydrogenation temperature at 0.2 MPa H2. A low hydropyrolysis temperature of 450 degrees C maximized C10 cycloalkane yield at 72.3 wt% with 80.1% selectivity, while a high temperature of 600 degrees C yielded 76.6 wt% C5 isoalkane. A deconstruction mechanism in the catalytic cascade upcycling of NRGWs was proposed by employing limonene hydrogenation as a probe reaction. The results demonstrate that upcycling polymer wastes by cascade hydropyrolysis-hydrogenation is a promising approach to produce alternative fuels with improved properties.