Abstract:In recent years, the pyrolysis technique has been adopted for converting non-degradable materials into biofuels and the yields of this process, oil and gas can be substituted as a fuel in CI engine. In this study, the medical waste plastics such as masks, gloves, personal protective equipment (PPE) kit and other plastics associated with hospitals were seen as the feedstock material for the pyrolysis process. It is collected from Government Medical College Hospital Villupuram, Tamil Nadu, India. The proximate and ultimate characterization of these wastes shows the percentage of volatile matter in the mask, gloves, and PPE kit are 81.2%, 79.3%, and 79.6%, respectively, and carbon percentage lies in the range of 75% to 78%, which ensures that the feedstock can be used in this process. The pyrolysis technique is carried out separately for all the collected feedstock such as mask, glove and other PPE kits. In this research, the mask waste showed a higher pyrolytic oil yield rate and is 80.3 wt% at 350°C than other plastics wastes. Further, FTIR of all the plastic waste confirms that pyrolytic oil is in acidic nature and it contains carboxylic acids and other heavier compounds, which are unstable in nature. To improve the fuel characteristics of pyrolytic oil, blending it with diesel requires the utilization of surfactants such as Span 80, Tween 60 and Atlox 4916. In this analysis, 5% of surfactant is mixed with 15% of pyrolytic oil and 80% of diesel. Among the various surfactants Atlox 4916, shows better fuel properties than other pyrolytic oil of plastic waste used in the analysis. Emulsifier fuel blend is prepared from different pyrolytic oils such as masks, gloves and PPE kit with Atlox 4916 surfactant, and MA, GA and PA, respectively. However, the pyrolytic oil from mask with Atlox 4916 surfactant blend has a (42.26 MJ/kg) higher calorific value. The evaluation of performance and emissions is conducted for the test fuels with surfactants derived from mask (MA), gloves (GA) and PPE (PA). Among these blends, MA showed better results in performance and emission behavior. The BTE of MA is 28.4%, which is 4.69% lower diesel and it is 2.077% and 2.95% higher than blend GA and PA. Blend MA shows lower emissions than other blends.

From pandemic protection to fuel production: Conversion of waste personal protective equipment-kits to high-quality hydro-processed fuels

Integration of catalytic fast pyrolysis and hydroprocessing: a pathway to refinery intermediates and “drop-in” fuels from biomass

Recovery of Hydrocarbon Fuel from Mixture of Municipal Waste Plastics Using Catalyst

Conversion of waste plastics into low-emissive hydrocarbon fuels through catalytic depolymerization in a new laboratory scale batch reactor

Enhanced Oil Yield by Catalytic Pyrolysis of Thermoplastics Using Cost-Effective Spent FCC and BaCO3 and Its Valorization to Gasoline and Diesel Grade Fuel via Fractionation

Hydrogen production potential from plastic pyrolysis oil: Experimental and economic insights

A comparative analysis of pyrolytic oil from medical waste and its suitability as fuel in a Compression Ignition engine

Automobile fuels (diesel and petrol) from plastic pyrolysis oil—Production and characterisation

Experimental investigation to identify the type of waste plastic pyrolysis oil suitable for conversion to diesel engine fuel

Catalytic hydroprocessing of waste cooking oil for the production of drop-in aviation fuel and optimization for improving jet biofuel quality in a fixed bed reactor

Gasoline like fuel from plastic waste pyrolysis and hydrotreatment

Processing and Recovery of Heavy Crude Oil Using an HPA-Ni Catalyst and Natural Gas

Extraction and Performance Analysis of Hydrocarbons from Waste Plastic Using the Pyrolysis Process

Green hydrocarbons fuel production from agricultural waste biomass in the presence of a novel heterogeneous catalyst

Combustion and emission analysis of hydrogenated waste polypropylene pyrolysis oil blended with diesel

Customized Atmospheric Catalytic Hydropyrolysis of Biomass to High-Quality Bio-Oil Suitable for Coprocessing in Refining Units

Conversion of Mixed Waste Plastic into Fuel Oil Production from Pyrolysis

Catalytic pyrolysis of waste oil into hydrocarbon fuel utilizing cerium oxide catalyst

Hydrocarbons Extracted from Advanced Pyrolysis Bio-Oils: Characterization and Refining

Processing renewable and waste-based feedstocks with fluid catalytic cracking: Impact on catalytic performance and considerations for improved catalyst design