Abstract:How processing solvents influence the overall photovoltaic performances of polymer solar cells (PSCs) remains unclear in various recently emerged new material systems. Here we systematically studied this issue by integrating an extensively used poly (3-hexylthiophene) (P3HT), or a recently developed conjugated polymer P2F-EHp, with different non-fullerene acceptors. The P3HT based devices processed with the non-halogenated solvent, 2-methylanisole in presence of 1-methylnaphthalene as solvent additive, exhibit reduced bimolecular and trap-assisted monomolecular recombination, facile charge extraction and enhanced charge carrier mobilities. Morphological investigation reveals that the optimizing crystallites, phase purity as well as nanofibrous structure is effective to the enhancement of charge generation and transport. Note that P3HT:O-IDTBR based devices processed with these non-halogenated solvents exhibit an impressive power conversion efficiency of 7.1% with a high fill factor of 75.09% on a device area of 0.05 cm2, and the efficiency remained 6.89% even in a device with large active layer area of 1 cm2 with promising thermal stability. It is also noted that efficient PSCs consisting of P2F-EHp and non-fullerene acceptors of IT-4F and IT-4Cl were developed via optimizing non-halogenated toluene:o-xylene co-solvent. The detailed investigation of film morphology demonstrated that the co-solvent appeared to assist the manipulation of crystal coherent lengths and effectively decrease the phase separation of the corresponding blend films. Of particular importance is that this material system is compatible with the low-cost blade-coating technique and can be processed under ambient conditions without post-treatment. A remarkable power conversion efficiency of 10.1% was achieved by blade-coating the P2F-EHp:IT-4F:IT-4Cl blends in air. The results indicated that using non-halogenated solvents is a promising candidate for constructing efficient PSCs toward practical applications.

A Nontoxic NFM Solvent for High-Efficiency Perovskite Solar Cells with a Widened Processing Window.

Green-solvent-processed Formamidinium-Based Perovskite Solar Cells with Uniform Grain Growth and Strengthened Interfacial Contact Via a Nanostructured Tin Oxide Layer

Greener and Easily Available Solvent Assisted Preparation of High Efficiency Perovskite Solar Cells

Co‐Solvent Engineering Contributing to Achieve High‐Performance Perovskite Solar Cells and Modules Based on Anti‐Solvent Free Technology

Solution-processed perovskite solar cells using environmentally friendly solvent system

All Green Solvent Engineering of Organic-Inorganic Hybrid Perovskite Layer for High-Performance Solar Cells

Cost‐Effective Acetonitrile‐Based Precursor Solution Mitigates Heterogeneous Nucleation for Efficient and Stable Perovskite Solar Cells

Systematic optimization of perovskite solar cells via green solvent systems

Fabricating Planar Perovskite Solar Cells through a Greener Approach

Highly Efficient Perovskite Solar Cells Using Non-Toxic Industry Compatible Solvent System

Greener, Nonhalogenated Solvent Systems for Highly Efficient Perovskite Solar Cells

Morphology Control towards Green Solvent System Processed High Performance Semitransparent CH3NH3PbI3 Film for Perovskite Solar Cell

Remanent solvent management engineering of perovskite films for PEDOT: PSS-based inverted solar cells

Green–Solvent–Processable Perovskite Solar Cells

Toward Sustainable Manufacturing of Highly Efficient and Stable Semi-transparent Perovskite Solar Cells: the Critical Role of Green Solvent Properties

Highly Efficient Perovskite Solar Cells Fabricated by Simplified One-Step Deposition Method with Non-Halogenated Anti-Solvents

Improving Efficiency of Non-Fullerene Polymer Solar Cells by Using Non-Halogenated Solvents

Polyvinylpyrrolidone As Additive for Perovskite Solar Cells with Water and Isopropanol As Solvents

Green Solution-Bathing Process for Efficient Large-Area Planar Perovskite Solar Cells

Solvent Engineering of the Precursor Solution toward Large‐Area Production of Perovskite Solar Cells

Anti‐Solvent‐Free Fabrication of Stable FA0.9Cs0.1PbI3 Perovskite Solar Cells with Efficiency Exceeding 24.0% through a Naphthalene‐Based Passivator