Abstract:A fiber optic Mach–Zehnder interferometer (MZI) sensor based on a semi-open cavity structure for simultaneous measurement of underwater temperature and salinity has been proposed and demonstrated. The optical fiber structure consists of five segments, including single-mode fiber (SMF), offset welded, and general welded no-core fibers (NCFs). We have performed simulations and experimental validations to verify its effectiveness. Furthermore, the detailed analysis on four sensors with varying design parameters has been completed. Among four sensors, sensor-4 exhibits the highest temperature sensitivity of 1.28 nm/°C ( ${R}$ is 0.99), while sensor-3 demonstrates the highest salinity sensitivity of −3.09 nm/wt% ( ${R}$ is −0.98). By calculating and analyzing the sensitivity of temperature and salinity for different resonance peaks, the simultaneous measurement of temperature and salinity has been achieved. During a 2-h stability test, all the sensors exhibited good stability, with a maximum wavelength drift of 0.24 nm. Thereinto, sensor-4 has demonstrated a smaller wavelength drift of 0.10 nm. The salinity response time of sensor-4, when the salinity changes from 0 to 2, 4, and 6 wt%, is less than 4 s. Furthermore, the experimental results indicate that the measurement sensitivity can be enhanced by increasing the contact area between the semi-open cavity Section and the external environment. In addition, by modifying the offset distance and sensing length, the sensitivity can be further improved. The proposed sensor exhibits excellent reversibility, stability, repeatability, and rapid response characteristics. It has promising potential applications in areas, such as aquaculture, biochemical detection, and marine environment exploration.

A Simple Combination Method of MZI and MI for Salinity Measurement.

Modeling Optical Microfiber Loops for Seawater Sensing.

A Simple Integrated Interferometer for Salinity and Temperature Measurement

High-sensitivity Salinity Sensor Based on Etched C-type Micro-Structured Fiber Sensing Structure

Low-Cost High Sensitivity Large Offset Mach-Zehnder Interferometer Optical Fiber Salinity Sensor with Long Sensing Area

Underwater Temperature and Salinity Fiber Sensor Based on Semi-open Cavity Structure of Asymmetric MZI

Integrated hybrid optical fiber Mach-Zehnder interferometers for simultaneous measurement of seawater temperature and salinity

Lateral offset optical fiber modal interferometer sensor for simultaneous measurement of seawater temperature and salinity

High sensitive Mach–Zehnder interferometer for seawater refractive index measurement

Simultaneous Measurement of Seawater Salinity and Temperature With Composite Fiber-Optic Interferometer

Highly sensitive salinity sensor based on Mach-Zehnder interferometer with double-C fiber

Strain-Insensitive Optical Fiber Sensor for Temperature and Salinity Measurement With Polynomial Surface Decoupling Algorithm

Simultaneous Measurement of Seawater Temperature and Salinity Based on Microfiber MZ Interferometer With a Knot Resonator

High-sensitivity Fiber Salinity Sensor Based on an Exposed-Core Microstructured Fiber Interferometer

Simultaneous salinity and temperature measurement using multimode interference effect

High-sensitivity Special Open-Cavity Mach-Zehnder Structure for Salinity Measurement Based on Etched Double-Side Hole Fiber

Highly sensitive salinity and temperature measurement based on tapered-SHF MZI fiber laser structure

Multifunctional Optical Fiber Sensor for Simultaneous Measurement of Temperature and Salinity

The Highly Sensitive Refractive Index Sensing of Seawater Based on a Large Lateral Offset Mach–Zehnder Interferometer

Highly Sensitive and Regulatable Optical Fiber Vernier Sensor Based on Two Integrated Parallel MZIs

High-sensitivity Salinity Measurement Sensor Based on No-Core Fiber