Abstract:For modular permanent magnet (PM) machines with overlapping (OLP) windings widely employed in wind power generation, the large torque ripple and long end winding are major issues. In order to solve these problems, PM machines with non-overlapping (NOLP) windings and redundant teeth for easy modularity are proposed in this paper. The comparative study between modular machines with these two kinds of windings is necessary and is the major focus of this paper. For the sake of clarity, two modular dual 3-phase machines with 42-slots/32-poles (42S/32P) and 192S/32P combinations are chosen as examples to show the differences in terms of machine performance. The proposed 42S/32P modular machine adopts NOLP winding, while the conventional 192S/32P one uses the OLP type. Based on the results, it is found that the modular machine with NOLP winding has comparable average torque and efficiency. In the meantime, much lower torque ripple exists for the proposed modular machine regardless of the current value. The shorter and simpler end windings are beneficial to manufacturability. Moreover, the proposed modular machine with NOLP winding will be more fault tolerant due to smaller mutual inductances between phases and larger <italic xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">d</italic> -axis inductance. Finally, the proposed 42S/32P modular machine is prototyped and the experiments validate the correctness of the analyses in this paper. Despite two specific examples being used, the conclusion should be generic and can be employed to modular machines with other slot and pole number combinations.

Vibration Performance Analysis of Permanent Magnet Synchronous Motor with Modular Winding

Solution of Permanent Magnet Synchronous Motors with Partition between Poles Halbach Magnet

Comparative Study of Modular Dual 3-phase Permanent Magnet Machines with Overlapping/Non-overlapping Windings

Detent-Force Analysis and Reduction of Modular Permanent-Magnet Linear Synchronous Motors with Non-overlapping Windings

Research on Electromagnetic and Vibration Characteristics of Dynamic Eccentric PMSM Based on Signal Demodulation

Researches on Behavior of Vibration in Axial Flux Permanent Magnet Synchronous Motor

Research on electromagnetic force wave analysis and vibration characteristics of permanent magnet synchronous motor based on finite element simulation

Analysis and Control of Seven-Phase Permanent-Magnet Bearingless Motor with Single Set of Half-Coiled Winding.

Vibration Contribution Analysis of Radial and Tangential Electromagnetic Force Harmonic of Permanent Magnet Synchronous Motor

Research on Winding MMF Harmonics of the PMSM with the Same Number of Poles and Slots

Vibration of permanent magnet synchronous motor with different slot-pole combinations and winding layers

Analysis of Vibration in Modular Fault-tolerant PMSM under One-phase Open-circuit Fault

Design and harmonic analysis of single winding bearingless PM synchronous motor with high winding coefficient

Vibration Analysis and Comparison of Low-Speed Outer Rotor Permanent Magnet Synchronous Machines

Vibration Enhancement or Weakening Effect Caused by Permanent Magnet Synchronous Motor Radial and Tangential Force Formed by Tooth Harmonics

Analysis of MMF of the PMSM with the Same Number of Poles and Slots Considering Different Number of Winding Turns

Modeling and Analysis of a Magnetically Levitated Synchronous Permanent Magnet Planar Motor with Concentric Structure Winding

Analysis of Zeroth-Mode Slot Frequency Vibration of Integer Slot Permanent-Magnet Synchronous Motors.

Research on Electromagnetic Vibration Characteristics of a Permanent Magnet Synchronous Motor Based on Multi-Physical Field Coupling

Performance Analysis of Double-Sided Permanent Magnet Linear Synchronous Motor With Quasi-Sinusoidal Ring Windings

Accurate Modelling and Modal Analysis of Stator System in Permanent Magnet Synchronous Motor with Concentrated Winding for Vibration Prediction