Abstract:With the development and application of modular multilevel converter (MMC) HVDC technology, MMC-based medium-voltage dc (MMC-MVDC) distribution system is gradually attracting the attention of researchers in recent years due to its superior harmonic performance, independent control of the active and reactive power, rapid transient response, large transmission capacity and less DC/AC conversion stages. It is very suitable for the future development of urban power grid. In order to improve the power supply reliability and reduce the power outage time of MMC-MVDC system, it is usually required to operate continuously for a period of time when the dc pole-to-ground short circuit fault occurs. Therefore, small current grounding method is usually used. However, when the pole-to-ground fault occurs, the steady-state fault current is small and the steady-state fault voltage is basically the same in each dc line. It is difficult for the current differential protection to locate and isolate the fault area accurately. In this study, firstly, the dc pole-to-ground short circuit fault path is analysed. Secondly, an active fault location method for multiterminal MMC-MVDC system under dc pole-to-ground fault is proposed by using the dc side capacitors of equipment that is originally connected to the MMC-MVDC system, such as two-level converters and dc solid state transformers (DCSSTs). This method can locate the fault dc line actively without adding external signal injection equipment or switching the system ac side grounding resistance, and can reduce the accuracy requirements for current differential protection equipment. Finally, a three-terminal MMC-MVDC distribution simulation model established on PSCAD/EMTDC validates the proposed fault location method.

Fault current analysis of MMC based HVDC system under DC pole-to-pole fault condition

Study on Calculation Method for Steady-state Short-circuit Current of MMC during a DC pole-to-pole Fault

A Comprehensive Control Method with Model Predictive Function of MMC-HVDC System under Unbalanced Grid Faults

Fault Current and Voltage Estimation Method in Symmetrical Monopolar MMC-based DC Grids

DC Fault Analysis and Clearance Solutions of MMC-HVDC Systems

A Calculation Method Of Analytical Dc Fault Current In Mmc-Hvdc Grid Including Current-Limiting Devices

Symmetrical fault analysis at AC transmission line with back-to-back MMC-HVDC considering controller characteristics

Fault location method for multi-terminal MMC-based MVDC distribution system under DC pole-to-ground fault

Research on a current calculation method and characteristics of pole-to-ground faults in true bipolar MMC-HVDC grids considering line coupling✰

A MMC Topology with AC Short-Circuit Fault Ride-Through Capability and its Control Strategies

The Evolution and Variation of Sub-Module Topologies with DC-fault Current Clearing Capability in MMC-HVDC

Electro-mechanical Transient Modeling of MMC Based Multi-Terminal HVDC System with DC Faults Considered

Analytical Modeling of Modular Multilevel Converter Under Pole-to-Pole DC Fault and Application to System Design and Protection

Analysis of Submodule Capacitor Overvoltage During DC-side Fault in Hybrid MMC-based HVDC System

The Unified Model and Optimal Operation Analysis for A Modular Multilevel Converter

A Feasible Coordination Protection Strategy for MMC-MTDC Systems under DC Faults

Analysis and Enhanced Control of Hybrid-MMC-Based HVDC Systems During Asymmetrical DC Voltage Faults

Analysis and Control of Modular Multilevel Converter Based HVDC Transmission Systems During Grid Faults

An Equivalent Calculation Method for Pole-to-Ground Fault Transient Characteristics of Symmetrical Monopolar MMC Based DC Grid

The Short-Circuit Fault Current Impact Mechanism and Adaptive Control Strategy of an MMC-HVDC

Analysis of Fault and Protection Strategy of a Converter Station in MMC-HVDC System