Impacts of Three MMC-HVDC Configurations on AC System Stability under DC Line Faults
Geng Tang,Zheng Xu,Yuzhi Zhou
DOI: https://doi.org/10.1109/pesgm.2015.7285663
IF: 7.326
2014-01-01
IEEE Transactions on Power Systems
Abstract:This paper analyzes the dc line fault transient stability characteristics of AC/DC power systems with three different modular multilevel converter based high voltage direct current (MMC-HVDC) configurations. The first configuration is half bridge sub-module based MMC (H-MMC) HVDC configuration, which clears dc line faults by tripping the ac circuit breakers. The clamp double sub-module (CDSM) basedMMC (C-MMC) HVDC configuration with dc line fault clearance ability constitutes the second configuration. A line-commutated converter (LCC) and MMC hybrid HVDC configuration with dc line fault clearance ability, named LCC-diode-MMC (LCC-D-MMC), is the third configuration. The detailed processes of clearing dc line faults in three MMC-HVDC configurations are analyzed. The equal area criterion is utilized to analyze the dc line fault transient processes. Besides, to evaluate the power system transient stability characteristics in three MMC-HVDC configurations, an index, called critical ac transmitted power (Pac-critical), is proposed. Under the same dc line to ground fault, transient stability characteristics of three test systems based on the three different MMC-HVDC configurations are compared. Excellent performance of the LCC-D-MMC HVDC configuration under the dc line fault is demonstrated through comparison of Pac-critical in the three test systems. Finally, the study is extended to a modified New England 39-bus system, and the simulation results also correspond with the theoretical analysis.