Abstract:O and N substitution produces ultrastable POS33– and Li3N unique functional units, wherein POS33‐ intrinsically enhance the structural stability of Li2.96P0.98S3.92O0.06–Li3N glass–ceramic and suppresses the generation of toxic H2S in the ambient environment. Furthermore, O and N leads to the Pre‐solid‐electrolyte interphase (SEI) enriched Li2O, and Li3N species realize stable and reversible Li‐stripping/plating for Li//Li cells beneficial for all‐solid‐state lithium–metal batteries.The marriage of solid‐state sulfide electrolytes (SSSEs) with Li‐anode and oxide‐based cathodes can multiply the energy density of all‐solid‐state Lithium–metal batteries (ASSLMBs). However, hydrolysis in the air, reduction at the Li/SSSE interface, and growth of Li‐dendrites inside SSSEs collectively block the route of sulfide‐based ASSLMBs. Herein, a novel Li2.96P0.98S3.92O0.06‐Li3N glass–ceramic electrolyte (GCE) is developed, wherein O and N substitution produce POS33– and Li3N unique functional units enable superior σLi+ 1.58 mS cm–1 at RT. Notably, POS33– units in Li2.96P0.98S3.92O0.06‐Li3N excellently prevent the structural degradation against moisture @45–50%. The critical current density of Li2.96P0.98S3.92O0.06–Li3N reaches 1 mA cm–2/1 mAh cm–2 @ RT. Moreover, Li//Li cells realize unprecedented Li‐plating/stripping >1000 h at 0.3 mA cm–2/0.3 mAh cm–2 and 0.5 mA cm–2/0.5 mAh cm–2 at RT. ToF‐SIMS and depth‐X‐ray photoelectron spectroscopy (XPS) confirm the formation of Pre‐solid‐electrolyte interphase (SEI) enriched with thermodynamically stable Li2O and Li3N species at Li/Li2.96P0.98S3.92O0.06–Li3N interface, suppressing the interfacial reactions and growth of Li‐dendrites inside Li2.96P0.98S3.92O0.06–Li3N. Furthermore, LiNbO3@NCA/Li2.96P0.98S3.92O0.06–Li3N/Li cells deliver a remarkable initial discharge capacity of 177.3, 177.6, and 177.8 mAh g–1 with 7.50, 16.50, and 21.50 mg cm–2 of NCA loading. Thus, the novel Li2.96P0.98S3.92O0.06–Li3N GCE addresses all key challenging issues and has tremendous potential to be used in sulfide‐based high‐energy ASSLMBs.

Optimizing the Crystallinity of Li1.5al0.5ge1.5(Po4)3 Oxide Electrolytes for the Enhanced Performance in All-Solid-State Lithium-Sulfur Batteries

Insight into the role of crystallinity in oxide electrolytes enabling high-performance all-solid-state lithium-sulfur batteries

A Dynamically Stable Sulfide Electrolyte Architecture for High-Performance All-Solid-State Lithium Metal Batteries

Influence of Crystallinity of Lithium Thiophosphate Solid Electrolytes on the Performance of Solid‐State Batteries

Thio‐/LISICON and LGPS‐Type Solid Electrolytes for All‐Solid‐State Lithium‐Ion Batteries

Unraveling the crystallinity on battery performances of chlorine-rich argyrodite electrolytes

Dendrite-Free Li5.5PS4.5Cl1.5-Based All-Solid-State Lithium Battery Enabled by Grain Boundary Electronic Insulation Strategy through In Situ Polymer Encapsulation

High Capacity And Superior Cyclic Performances Of All-Solid-State Lithium-Sulfur Batteries Enabled By A High-Conductivity Li10snp2s12 Solid Electrolyte

Lithium Dendrite Suppression and Enhanced Interfacial Compatibility Enabled by an Ex Situ SEI on Li Anode for LAGP-Based All-Solid-State Batteries

Constructing Stable Anodic Interphase for Quasi-Solid-State Lithium–Sulfur Batteries

Examining Electrochemical and Mechanical Behavior of Amorphous and Crystalline Sulfide-Based Solid-State Electrolytes

Constructing robust cathode/Li interfaces and intensifying ion transport kinetics for PEO-based solid-state lithium-sulfur batteries

Integrating Lithium Sulfide as a Single Ionic Conductor Interphase for Stable All-Solid-State Lithium-Sulfur Batteries

An Effective Strategy to Enable Argyrodite Sulfides as Superb Solid-State Electrolytes: Safeguarding Remarkable Ionic Conductivity and Interfacial Stability with Electrodes

Enabling high-performance all-solid-state lithium batteries with high ionic conductive sulfide-based composite solid electrolyte and ex-situ artificial SEI film

Silicon-Doped Argyrodite Solid Electrolyte Li6PS5I with Improved Ionic Conductivity and Interfacial Compatibility for High-Performance All-Solid-State Lithium Batteries.

An Adjustable-Porosity Plastic Crystal Electrolyte Enables High-Performance All-Solid-State Lithium-Oxygen Batteries

Designing the Interface Layer of Solid Electrolytes for All‐Solid‐State Lithium Batteries

Styrene–Butadiene–Styrene Block Copolymer-Li5.5PS4.5Cl1.5 Composite Solid-State Electrolyte Enabling a High-Performance All-Solid-State Lithium Battery

Design Unique Air‐Stable and Li–Metal Compatible Sulfide Electrolyte via Exploration of Anion Functional Units for All‐Solid‐State Lithium–Metal Batteries

Garnet‐Type Solid‐State Electrolytes: Crystal‐Phase Regulation and Interface Modification for Enhanced Lithium Metal Batteries