Abstract:Biochar capability in CO 2 adsorption has already been confirmed by multiple research works. However, CO 2 is never emitted as a pure gas; therefore, studying the impact of other components in the gas mixture on CO 2 adsorption on biochar is necessary. One of the components that is always co-released with CO 2 is CO. In this work, the affinity of biochar, produced from softwood via fast pyrolysis at 500 °C, for CO and CO 2 was first predicted using molecular modeling binding energy calculations. The results suggested that CO 2 would be favored over CO for adsorption on biochar because of its stronger adsorption (higher released adsorption energy). The biochar adsorption of pure CO and CO 2 were then studied using batch and dynamic experiments, where the isotherm and kinetic models of the pure gas adsorptions were derived. Dual-site Langmuir isotherm fitted both of the gases equilibrium adsorption data the best, confirming the non-homogeneous surface of biochar. The Avrami kinetic model was the best-fitted model for the adsorption rate of the gases, which showed that both chemical and physical interactions were involved in the adsorption processes. The results from molecular modeling matched the results from pure CO and CO 2 adsorption on biochar, as the capacity of pure CO 2 was more than three times greater than that of pure CO. The dynamic binary CO/CO 2 adsorption experiments with 10-90 vol.% CO 2 (balanced with CO), carried out at 20 °C, showed that although both of the gases were adsorbed on biochar when the adsorption bed was fresh, some of the CO molecules were later removed by the more favored CO 2 molecules to the extent that for up to 50 vol.% CO, all of the CO molecules were removed by the CO 2 molecules, and the CO overall capacity was 0 mmol/g. For examining the impact of temperature on CO 2 and CO adsorption on biochar, the pure CO and CO 2 along with three selected binary CO/CO 2 adsorption tests were repeated at 100 °C. The pure adsorption tests of the two gases on biochar at 100 °C suggested that although CO 2 adsorption capacity was negatively impacted by the temperature increase, CO adsorption capacity was not altered by the temperature. Results from binary adsorption tests at 100 °C confirmed that at 100 °C, more CO would adsorb on biochar at the same input levels of the two gases compared to 20 °C due to CO 2 decreased adsorption at higher temperatures.

Insight the CO2 adsorption onto biomass-pyrolysis derived char via experimental analysis coupled with DFT calculation

Theoretical Insights into the Mechanism of CO2 Chemisorption and Subsequent CO Desorption on Char Surface with Zigzag Active Sites

Comprehensive Analysis of Biochar-Based Co2 Capture

An Efficient Biochar Adsorbent for CO2 Capture: Combined Experimental and Theoretical Study on the Promotion Mechanism of N-doping

Insight into the Relationship Between CO2 Gasification Characteristics and Char Structure of Biomass

Micro-structure, Surface Properties and Adsorption Capacity of Ball-Milled Cellulosic Biomass Derived Biochar Based Mineral Composites Synthesized Via Carbon-Bed Pyrolysis

Molecular Simulation Combined with DFT Calculation Guided Heteroatom-Doped Biochar Rational Design for Highly Selective and Efficient CO2 Capture

The selective adsorption mechanism of CO 2 from biomass pyrolysis gas on N-doped carbon materials with an electric field: A first-principles study

Advantages of dual CO 2 & O 2 adsorption model for assessment of micropore development in biochar during two-stage gasification

Insights into CO2 adsorption on KOH-activated biochars derived from the mixed sewage sludge and pine sawdust

Structural and Gasification Kinetic Studies on Co-pyrolysis Chars of Coal and Biomass

DFT study of the catalytic effect of Fe on the gasification of char-CO2

Impact evaluation of coexisting gas CO on CO 2 adsorption on biochar derived from softwood shavings

Renewable biochar derived from mixed sewage sludge and pine sawdust for carbon dioxide capture

Insight on microscopic mechanisms of CH4 and CO2 adsorption of coal with different ranks

Adsorption of single-ring organic compounds to wood charcoals prepared under different thermochemical conditions.

CO2 capture by adsorption on biomass-derived activated char: A review

Relationship of CO 2 adsorption performance and physicochemical property of biochar prepared by different types of biomass waste

Physicochemical and adsorption properties of biochar from biomass-based pyrolytic polygeneration: effects of biomass species and temperature

Oxidative pyrolysis for enhanced-CO 2 adsorption capacity in biosolid-derived biochar

Correlations and adsorption mechanisms of aromatic compounds on a high heat temperature treated bamboo biochar