Abstract:The binary perovskite-type compound (1 − x )BiFeO 3 – x BaTiO 3 (BF-BT) is considered as a promising high-temperature lead-free piezoelectric material due to its high Curie temperature ( T C > 400 °C) and better electromechanical properties. In this work, ternary lead-free piezoelectric ceramics with a chemical formula of (0.67 − x )BiFeO3–0.33BaTiO3– x Bi(Zn0.5Ti0.5)O 3 + 1 mol% MnO 2 (where x = 0–0.05) were prepared by the conventional solid-state reaction route. The effects of Bi(Zn 0.5 Ti 0.5 )O 3 introduction on the phase structures and microstructures, piezoelectric and dielectric properties, as well as impedance characteristics of BF-BT ceramics were investigated in detail. Firstly, all the samples synthesized exhibit a pure perovskite structure with the coexistence of rhombohedral ( R ) and tetragonal ( T ) phases, and the T phase content increases with increase in x . A small amount of Bi(Zn 0.5 Ti 0.5 )O 3 ( x ≤ 0.03) that were incorporated into the perovskite lattice of BF-BT can promote the grain growth of ceramics. Secondly, all samples were found with a notable relaxed phase transition behavior, T C of the system decreases with increase in x . The AC impedance spectra of the samples were fitted and analyzed according to the R-CPE equivalent circuit model, the electric impedance of the ceramics at high temperatures was mainly contributed by grain boundaries. Moreover, the dielectric relaxation activation energy of the samples firstly decreases and then increases with increase in x . Finally, the composition with x = 0.02 shows the optimized electrical properties among these samples, including T C = 454 °C, d 33 = 117 pC/N, k p = 23%, tan δ = 0.11, which are mainly benefited from the bismuth content compensation and the substitution of (Zn 0.5 Ti 0.5 ) 3+ for Fe 3+ at B-site reducing the valence change of Fe 3+ in BF-BT.

Quenching and Electrical Current Poling Effect on Improved Ferroelectric and Piezoelectric Properties in BiFeO3-Based High-Temperature Piezoceramics

Quenching and Electrical Current Poling Effect on Improved Ferroelectric and Piezoelectric Properties in BiFeO 3 -Based High-Temperature Piezoceramics

Large electric‐field‐induced strain and enhanced piezoelectric constant in CuO‐modified BiFeO3‐BaTiO3 ceramics

Enhanced Electric-Field-induced Strain in 0.7bi(1−x)smxfeo3–0.3batio3 Lead-Free Ceramics

Defect dipole-induced poling characteristics and ferroelectricity of quenched bismuth ferrite-based ceramics

Structural Evolution, Electrical Properties and Electric-Field-induced Changes of (0.8− X )pbtio 3 – X BiFeO 3 –0.2bazro 3 System Near the Morphotropic Phase Boundary

Enhanced piezoelectricity in 0.7BiFeO3-0.3BaTiO3 lead-free ceramics: Distinct effect of poling engineering

Facile Preparation and Performance of Novel High-Tc Xbi(ni1/2ti1/2)o3-(1-x)pb(zr1/2ti1/2)o3 Piezoceramics

Enhancing Electrical Properties of High-Curie Temperature Piezoelectric Ceramics BNT-PZT and Their Mechanism

Investigation of nonstoichiometric Fe on the ferroelectric properties of BiFeO3-based piezoelectric ceramics

Highly Enhanced Thermal Stability in Quenched Na0.5Bi0.5TiO3-based Lead-Free Piezoceramics

Enhanced high-temperature piezoelectric properties of Bi(Zn0.5Ti0.5)O3-modified BiFeO3–BaTiO3 ceramics

Surface structure and quenching effects in BiFeO 3 ‐BaTiO 3 ceramics

Enhanced ferromagnetism and magnetoelectric response in quenched BiFeO<sub>3</sub>-based ceramics*

Improved chemical defects, domain structure and electrical properties of BiFeO 3 –BaTiO 3 lead-free ceramics by simultaneous Na/Bi codoping and quenching process

Superior Piezoelectric Performance with High Operating Temperature in Bismuth Ferrite-Based Ternary Ceramics

Effects of Bi(Zn0.5Ti0.5)O3 introduction on the structures and electrical properties of BiFeO3–BaTiO3 lead-free piezoelectric ceramics

Achieving high Curie temperature and prominent piezoelectric response via site engineering for BiFeO3-BaTiO3 ceramics

Enhanced Ferroelectric and Piezoelectric Properties of (Bi1-Xlax)feo3-batio3 Ceramics Near Morphotropic Phase Boundary

Enhanced Ferroelectricity and Magnetism of Quenched (1−X)bifeo3-Xbatio3 Ceramics

The development of BiFeO3-based ceramics