Abstract:Kinematic calibration of manipulators is an efficient and fundamental way to ensure reliability and high performance of robots. Research on kinematic calibration has a long tradition, and a common strategy used for calibration is to guarantee the least errors in the sense of root-mean-square deviation. However, the absolute positioning accuracy is determined by the maximum error of manipulators, and it is a key indicator for evaluating performance. For example, using manipulators to print machine elements, obviously where the error is the most, may likely cause inaccurate fit. Hence, it is crucial to study a robust calibration strategy. Considering the calibration problem, both positioning and orientation accuracy are ensured by minimizing the maximum positioning errors of three spherical mounted retro-reflectors (SMRs) on the end effector of manipulators. Unfortunately, traditional optimization methods based on gradient cannot be directly employed to solve the minimax problem. Due to the recent progress on optimization, researchers found that the minimax can be transformed into sequence quadratic programming problems under inequality conditions, thus providing solutions for solving the robust calibration. This paper applied this method to convert the calibration problem into constrained quadratic subproblems, and the subproblems can be solved through the primal-dual subgradient method. Then, convexity and robustness analysis is given to prove that these subproblems can quickly converge to a local minimum. Finally, to verify the validity of the proposed algorithm, the experiments are conducted on an IRB 2600 manipulator, and the results show that, with the minimax search algorithm, both the positioning and orientation accuracy is enhanced by 67.34% and 73.14%, respectively, which is significantly higher than the performance of the single-SMR calibration algorithm widely used in the field of industry.

A Sparse Piecewise Calibration Method for Potentiometer with Inherent Nonlinearity: A Comparison Study

Research on the Inherent Nonlinearity Calibration of the Potentiometer of a Miniature Linear Series Elastic Actuator

Modeling of a 14-bit, 100-MS/s pipelined ADC with digital nonlinearity calibration

A Novel Algorithm for Robust Calibration of Kinematic Manipulators and Its Experimental Validation

Separable Nonlinear Least Squares Algorithm for Robust Kinematic Calibration of Serial Robots.

Rapid calibration based on SQP algorithm for coordinate frame of localizers

Observability-Aware Intrinsic and Extrinsic Calibration of LiDAR-IMU Systems

Kinematic Calibration for Articulated Arm Coordinate Measuring Machines Base on Particle Swarm Optimization

Study on Nonlinear Error Calibration of Fiber Optical Gyroscope Scale Factor Based on LSTM

Calibration of a Multi-Beam LIDAR by Using Linear Instrumental Error Model

Dynamic Process Calibration Based on Sparse Partial Least Squares

Study on Calibration Method for the Performance Index of SPR Sensors

Segmented Two-Dimensional Progressive Polynomial Calibration Method for Nonlinear Sensors

A Novel Approach to Calibrate Open-Loop Amplifier Nonlinearities Through Piecewise Linear Interpolation

Accurate Nonlinearity and Temperature Compensation Method for Piezoresistive Pressure Sensors Based on Data Generation.

Efficient Calibration of a Scanning Probe on CMM

A Simplified Model MEMS Gyroscope Zero Bias Temperature Drift Calibration Method Based on BP Neural Network

Calibration of a Manipulator With a Regularized Parameter Identification Method

An open-source, accurate, and iterative calibration method for liquid-crystal-based spatial light modulators

Comparative Analysis and Optimal Selection of Calibration Functions in Pure Rotational Raman Lidar Technique

Dynamic Error Modeling and Compensation of a Scanning Probe on CMM