Abstract:Prediction of abrasive water jet cutting quality of ultra‐thick CFRP. Surface roughness and delamination extent are key indicators for assessing the surface quality of machined carbon fiber reinforced polymer (CFRP) laminates. This study conducted an in‐depth investigation on the uncontrollable surface quality of abrasive water jet (AWJ) machining of ultra‐thick CFRP. Considering the sensitivity of the laminate structure to the jet impact angle, an optimized response surface methodology was used to analyze the effects of process parameters on surface roughness. Additionally, the differences in surface roughness on both sides of the kerf under non‐orthogonal cutting were examined. Based on these analyses, a surface roughness prediction model was developed. Furthermore, the study comprehensively analyzed the effects of material mechanical properties and process parameters on delamination damage. Using dimensional analysis, a predictive model for the maximum delamination length, considering jet energy dissipation, was established. The novelty of this research is to reveal the difference in surface quality on both sides of the kerf under non‐orthogonal cutting, and to establish prediction models for surface roughness and delamination damage based on the energy dissipation characteristics of ultra‐thick CFRP AWJ machining. This research provides essential modeling foundations for enhancing the controllability of AWJ machining quality for ultra‐thick CFRP complex components. Highlights Surface roughness and delamination damage impact AWJ use for ultra‐thick CFRP. Non‐orthogonal cutting causes surface quality differences on kerf sides. A model for kerf surface roughness at any jet impact angle was established. The delamination mechanism in internal path cutting was analyzed. The delamination length model for ultra‐thick CFRP laminates was established.

Experimental Analysis and Prediction of CFRP Delamination Caused by Ice Impact

A Damage Threshold Prediction Model of CFRP Panel by Hail Impact Based on Delamination Mechanism

Low-velocity impact behavior and residual tensile strength of CFRP laminates

An experimental study of the dynamic responses of carbon fiber reinforced polymer composite laminates subjected to ice impact

Delamination Propagation Manipulation of Composite Laminates under Low-Velocity Impact and Residual Compressive Strength Evaluation

Experimental Investigation of the Double Impact Position Effect on the Mechanical Behavior of Low-Velocity Impact in CFRP Laminates

Experimental Investigation of Low-Velocity Impact Behavior and CAI on Composite Laminates by Discrete Interleaved Toughening

Study on the delamination behavior of thick composite laminates under low-energy impact

Damage Mechanisms and Analytical Model of CFRP Laminate under Low-Velocity Normal and Oblique Impacts

Numerical Investigation on Behaviors of Composite Laminates with Initial Delamination Defects under Impact and Compression after Impact

Experimental Investigation into the Failure of CFRP T-joints under Ice Impact and Quasi-static Loadings

Relationship Between Matrix Cracking and Delamination in CFRP Cross-Ply Laminates Subjected to Low Velocity Impact

Experimental and Simulation Study on Failure of Thermoplastic Carbon Fiber Composite Laminates under Low-Velocity Impact

Experimental and Numerical Analysis of Low-Velocity Impact Damage of CFRP Laminates with Rubber Protective Layer

Investigations of ice impact damage and residual performance of 3D angle-interlock woven composites based on in-situ sampling

Cryogenic Damage Mechanisms of CFRP Laminates Based on In-Situ X-ray Computed Tomography Characterization

Quality prediction and process optimization in abrasive waterjet cutting of ultra‐thick carbon fiber reinforced polymer

Delamination prediction in composite laminates under low-velocity impact

Low-Velocity Impact Behavior and Damage Characteristics of CFRP Laminates

A comprehensive experimental investigation of the rate-dependent interlaminar delamination behaviour of CFRP composites

Predicting Damage Behaviors of Composite Laminates under Multiple Low‐velocity Impacts