Abstract:A physically based material model for metals, with elastic–plastic and damage/failure orthotropy is proposed in this paper. The model is defined within the frameworks of irreversible thermodynamics and configurational continuum mechanics and integrated in the isoclinic configuration. The use of the multiplicative decomposition of deformation gradient makes the model applicable to arbitrary plastic and damage deformations. To account for the physical mechanisms of failure, the concept of thermally activated damage initially proposed by Klepaczko (1990) was adopted as the basis for the new damage evolution model. This makes the proposed damage/failure model compatible with the Mechanical Threshold Strength (MTS) model (Follansbee and Kocks, 1988; Chen and Gray, 1996; Goto et al., 2000; Gray et al., 1999; Chen et al., 1998) which was used to control evolution of flow stress during plastic deformation. In addition the constitutive model is coupled with a shock equation of state which allows for modelling of shock wave propagation in the material. The new model was implemented in DYNA3D and our in-house non-linear transient SPH code, MCM (Meshless Continuum Mechanics).Parameters for the new constitutive model for AA7010 (a polycrystalline aluminium alloy, whose orthotropy is a consequence of grain morphology), were derived on the basis of the tensile tests and Taylor anvil tests. The tensile tests were performed for the range of temperatures between 223.15K and 413.15K, and strain rates between 6.4×10-4s-1 and 6.4×101s-1.The new model was validated in two stages. The first stage comprised a series of single element tests design to separately validate elasticity, plasticity and damage related parts of the model. The second stage comprised a series of numerical simulations of Taylor anvil and plate impact tests for AA7010 and comparison of the numerical results with the experimental data. The numerical results illustrate the ability of the new model to predict experimentally observed behaviour.

A Continuum Constitutive Model for a 7003-Aluminum Alloy Considering the Stress State and Strain Rate Effects

Constitutive Model of Aviation Aluminum-Alloy Material in Metal Machining

On Dynamic Mechanical Properties of 3003 Aluminum Alloy Based on Generalized Incremental Stress-State-Dependent Damage Model with Modified Johnson–Cook Equation

Constitutive Modeling on Cyclic Stress-Strain Behaviour of 7A04-T6 High-Strength Aluminium Alloy

Study on constitutive relationship of 6061 aluminum alloy based on Johnson-Cook model

A modified Johnson-Cook model considering strain softening of A356 alloy

A Modified Johnson–Cook Constitutive Model and Its Application to High Speed Machining of 7050-T7451 Aluminum Alloy

A Damage-Effect-involved Phenomenological Crystal Plasticity Model and Computational Methods for Mechanical Responses of FeCrAl Alloys

A Physical-Based Plane Stress Constitutive Model for High Strength AA7075 under Hot Forming Conditions

Experimental and Numerical Study on Shear-Punch Test of 6060 T6 Extruded Aluminum Profile

Viscoplastic constitutive equations for modeling fluid loading and damage evolution during warm medium forming

Modelling of dynamic behaviour of orthotropic metals including damage and failure

A damage sequence interaction model for predicting the mechanical property of in-service aluminium alloy 6005A-T6

Characterization of the Fracture of an Aluminum Alloy Anticollision-Beam to Impact Loading

A continuum damage model for Mg/Al composite sheets rolling: Theoretical development and application

Modeling of the Ductile Fracture During the Sheet Forming of Aluminum Alloy Considering Non-Associated Constitutive Characteristic

Experimental and numerical investigation on plasticity and fracture behaviors of aluminum alloy 6061-T6 extrusions

Modeling the anisotropic plasticity and damage of AA7075 alloy in hot forming

Characterization and prediction of fracture in 6000- and 7000-series aluminum alloy sheet under various stress states

Numerical Analysis of Experiments on Damage and Fracture Behavior of Differently Preloaded Aluminum Alloy Specimens

A new constitutive model for HCP metals